Setting up workstations
Removing UNIX client software
This section describes the procedure for removing the print command client software. You may need to perform this procedure prior to updating software, or to correct corrupted file installation on the platform. The steps are shown below.
#cd /usr/xerox/NPS/IPS/client
#rm cconf
#cd /usr/xerox/NPS/IPS/client/bin
#rm listq
#rm print
#rm listjob
#cd ../man
#rm listq.1
#rm listjob.1
#rm print.1
#cd ../gpj
#rm XRXGPJ1.ps
#rm XRXGPJ2.ps
NOTE: If the wrong software has been loaded on the client, the executable files may have the wrong extension. If this is the case, delete everything under the above directories.
If there are any files named print, listq, or listjob in the directories, /bin, or /usr/bin, delete them also.
Guide to Submitting Jobs from the Client |
