Xerox 721P90350 manual

Printing using Xerox utilities and lpr utilities (DOS and UNIX)

•-size <paper size> Specifies the paper size.

–Acceptable standard values for models 4050/4090/4850/ 4890/92C and 2060 are “USLetter,” “USLegal,” “A4,” or “nxn.” Custom paper sizes must be specified in millimeters, and must range from 8x10" (203x254 mm) to 8.5x14" (216x356 mm).

–Acceptable standard values for models 96/4635/180 are “USLetter,” “USLegal,” “A3,” “A4,” “nxn,” “USLedger,” and “Tabloid.” Acceptable custom paper sizes (nxn, specified in millimeters) range from 7x10" (178x254 mm) to 14.33x17" (364x432 mm).

–When using standard values for size (for example, “USLegal” or “USLetter”) use the above format. For custom paper size, use the format: -size custom <n> <m>, where “n” and “m” are the paper width and length in millimeters. The keyword “custom” is required.

•-stitching <stitch value>

Specifies stitched (stapled) output. Accepted values are “none” or “singlePortrait.” The only acceptable value if you are stapling is singlePortrait. This option is available only with a third-party finishing device installed, when using a 96/4635/ 180 NPS/IPS.

If you use the print -stitching option and specify more than one file in the command line, all the files are stapled individually at the printer.

•-title <text>

Specifies the job title for this print request on the banner sheet. The default is the name of the first document file or source file. This string cannot exceed 40 characters. If the text string includes spaces, enclose it in quotes (“”).

•-uncollated <true>

Specifies that the job is to be uncollated. When this option is not specified, the job is collated. This option is supported only on the 96/4635/180 NPS/IPS.

When using this option, keep in mind:

–Copies of individual pages are collated or uncollated when using the PCL copy command within the job, but copies of the entire job are collated.

3-10 Guide to Submitting Jobs from the Client