5.Submitting print jobs using Windows NT 4.0 drivers

This chapter explains how to install the PostScript printer drivers, and procedures for accessing the job ticket and submitting print jobs using the NT 4.0 drivers that were shipped with NPS/IPS.

NOTE: Screen captures in this chapter are representative of what you are likely to see on your system. Variations may occur, depending on the software version and on the specific product used (for example, 4850 NPS/IPS).

Installing and configuring the system

You can install the PostScript level 2 printer driver (transparent client) on your Windows NT 4.0 system.

The PostScript driver for your Windows NT 4.0 system is delivered with the NPS/IPS ship kit. If, however, you need to obtain a driver, you have the following options:

Contact your local Xerox representative, who can source the driver for you.

Download the driver through the following web site: http://www.xerox.com/drivers

NOTE: NT 4.0 PostScript level 2 driver requires NPS/IPS version 1.5 or later.

NOTE: If you have any previously installed printer icons for the NT 4.0 transparent client, delete these icons and reboot your system before starting a new installation.

To install the printer driver from the DocuPrint Network Server software disks, follow these steps:

Guide to Submitting Jobs from the Client

5-1

Page 129
Image 129
Xerox 721P90350 manual Submitting print jobs using Windows NT 4.0 drivers, Installing and configuring the system