Printing using Xerox utilities and lpr utilities (DOS and UNIX)
•
Displays information for all jobs that have been submitted to the virtual printer you specify. You cannot use wildcard characters.
•
Displays information from the printer controller you specify. The default displays information from the printer controller listed in the /usr/xerox/nps/client/cconf file.
•
Displays the Job Pool Manager (JPM) status. (The JPM status is not the same as the status displayed on the UI.) Values for this option are not case sensitive and must be entered completely. The status values are as follows:
–“Complete”
The job was completed. One of the following messages appears:
Complete CancelledByOperator CancelledByUser CompleteWithWarning CompleteWithErrors Rejected
Aborted
–“Process”
The job is currently printing.
–“Queued”
The job may have been prescanned and is queued for printing.
–“Submitting”
The job is being submitted.
–“Undefined”
No status is currently assigned to the job. This may occur at the beginning of submission.
•
Displays information in verbose mode. Each job record displays in its entirety, up to the default number of records specified with the
Guide to Submitting Jobs from the Client |
