Additional KEY Features, Uses of START-IT Compact

Moving to the left of the AC recharge port are three LEDs, called the Battery Status Display, and a Battery Status Pushbutton. Pressing the pushbutton turns on the Battery Status Display. The pushbutton is pressed to check the battery level at any time. During AC recharge, the display is automatically active. During DC recharge, the display pushbutton can be periodically pressed to monitor the recharge process.

The colors of the three Battery Status Display LEDs are two red and one green. During AC recharge, the Battery Status Display is active to indicate the level of charge on the battery. The leftmost red LED indicates minimum charge on the battery. Recharge the battery when a single LED is the only one that lights. The center LED (red) indicates moderate charge on the battery. The green LED on the right indicates when the battery is FULL and you can stop charging.

To the left of the Battery Status Pushbutton is a work light. This provides the user with light while changing a tire, and connecting battery clamps. The work light is a long lasting lamp and will continuously operate for 32 hours from a fully charged battery. To the left of the Work light is the ON/Off rocker switch that controls operation of the work light.

Above the work light switch is a 12 Volt Accessory Socket. It is covered with a rubber protective cap. The cap keeps dust, dirt and moisture out of the socket. When the cap is lifted, the accessory socket can be used for powering 12 volt appliances that draw up to 15 amps current. This socket is also used during DC recharge.

1.1ADDITIONAL KEY FEATURES

1.ON/OFF safety power switch (no key required, no key to get lost!).

2.Audible Polarity alarm that sounds when cable clamps are connected to incorrect polarity.

3.Cordless/rechargeable-includes recharge adapters for standard 110-volt AC wall socket, and vehicle’s 12-volt DC accessory outlet using adapter cables.

4.Powerful-225 CCA cranking amps - 400 Amp rated clamps

5.Includes non-spillable, maintenance-free, heavy duty, 9-ampere hour sealed lead-acid battery.

6.Requires no maintenance (other than recharging) for optimum operation.

7.Heavy duty, industrial grade copper clamps and #6AWG jumper cables-with exclusive recessed cable holsters.

8.Exclusive cable storage channels that keep jumper cables out of the way until they are needed.

9.110-volt AC charger is Underwriter Laboratories safety tested and listed.

10.Easy-to-read LED Battery Charge Status Display - activated by pressing the Charge Status Button and automatically activated during AC recharge.

1.2USES OF START-IT COMPACT

-Jumpstart (using heavy duty battery cable and clamps):

Most batteries of engines with a standard 12 volt DC battery system: boat, small truck, car, airplane, RV, personal watercraft, snowmobile, tractor, etc.

-Operate (using 15 ampere rated 12 Volt Accessory Socket): 12-volt DC Fans, fluorescent work lights, air compressors, spotlights, TVs, portable radios, cassette or CD players, and more. The unit can quick-charge a cellular phone by using the phone’s 12-volt DC adapter cord.

-Illuminate areas: under the hood, inside tents, work areas while changing tires, etc.

NOTE: Other Vector appliances may also be used with this jump starter as long as they do not exceed the 15 ampere limit of the jump starter’s cigarette lighter type socket.

VEC016 specifications

The Vector VEC016 is a cutting-edge vehicle diagnostic tool designed for both professional mechanics and automotive enthusiasts. Renowned for its user-friendly interface and powerful features, the VEC016 brings advanced capabilities to the world of vehicle diagnostics, making it an indispensable tool in any workshop or garage.

One of the main features of the VEC016 is its ability to perform comprehensive vehicle scans. It is compatible with a wide range of vehicles, supporting various protocols and systems, including OBD-II, CAN, ISO9141, and KWP2000. This enables users to diagnose issues across multiple brands and models, ensuring that it remains relevant as automotive technology evolves.

The VEC016 is equipped with an intuitive touchscreen display that provides clear and concise information, making navigation simple and efficient. The tool can read and erase diagnostic trouble codes (DTCs) across engine, transmission, ABS, and airbag systems, making it versatile in addressing a variety of issues. The live data functionality allows users to view real-time information from the vehicle’s sensors, providing critical insights that can help diagnose recurring problems or fine-tune performance.

Another noteworthy technology featured in the VEC016 is its advanced graphical data representation. This feature allows mechanics to visualize data trends over time, making it easier to identify abnormalities and patterns that could indicate larger underlying issues. Additionally, the device supports freeze frame data, helping users understand the conditions that caused a specific diagnostic trouble code to trigger.

The VEC016 also includes features such as oil reset, EPB (electronic parking brake) reset, and SAS (steering angle sensor) calibration, which adds to its appeal for those involved in routine maintenance and calibration tasks. This makes the VEC016 an all-in-one diagnostic solution, eliminating the need for multiple tools.

With a robust build quality and rechargeable battery, the Vector VEC016 is designed for durability and convenience. Its portability allows mechanics to perform diagnostics on-site or in challenging environments, ensuring that assistance is always just a scan away.

Overall, the Vector VEC016 stands out as a powerful and versatile diagnostic tool, blending advanced technology with ease of use. Its array of features makes it an essential asset for anyone looking to maintain or repair modern vehicles effectively.