USE AS a JUMP-START System, Jumpstart Warnings

READ INSTRUCTION MANUAL AND PRODUCT LABELING CAREFULLY, BEFORE USING THIS PRODUCT. FOLLOW RECOMMENDED WARNINGS, CAUTIONS, AND SAFETY PROCEDURES, AND MANUFACTURER’S GUIDELINES FOR YOUR VEHICLE BATTERY.

IMPORTANT

This unit is delivered in a partially charged state - you must fully charge it before using it for the first time. Initial AC Charge should be for 24 hours.

Refer to Sections 4.1 and 4.2 for use of AC Recharge Adapter and DC/DC Charging Adapter.

2.USE AS A JUMP-START SYSTEM

2.1JUMPSTART WARNINGS

1.There is risk of explosive gas being released when batteries are improperly charged or discharged. Failure to follow instructions may Cause property damage, explosion hazard, and/or personal injury.

2.Do not smoke while jump starting

3.Only attempt to jumpstart a vehicle or boat in a well ventilated area.

4.This power system is to be used ONLY on vehicles or boats with 12-volt DC battery systems.

5.Do not attempt to jumpstart a frozen battery.

6.Do not wear vinyl clothing when jumpstarting a vehicle — friction can cause dangerous static electricity sparks.

7.Remove all metal jewelry - this can cause short circuits. Always use protective eyewear when jump-starting: contact with battery acid may cause blindness and/or severe burns.

8.Never touch red and black clamps together - this can cause dangerous sparks, power arcing, and/or explosion.

9.Do not attempt to jumpstart a frozen battery

10.After use as jump starter, turn OFF Power Safety Switch. Keep out of reach of children.

11.Vehicles that have on-board computerized systems may be damaged if vehicle battery is jump-started. Before jump-starting this type of vehicle, read the vehicle’s owner’s manual to confirm that external-starting assistance is advised.

12.Always start jump-starting with Power Safety Switch turned OFF - this allows the polarity alarm to sound if reverse (incorrect) polarity connection is made.

WARNING: Reverse Polarity Alarm Sounds, Reverse the cable clamp connections.

13.Excessive engine cranking can damage the vehicle ‘s starter motor. If the engine fails to start after the recommended number of attempts, discontinue jump-start procedure and look for other problems that may need to be corrected.

14.If vehicle to be started has a Positive Grounded System (positive battery terminal is connected to chassis): Replace steps 9 and 10 of the jump-start procedure (below) with the

following steps A and B, and then proceed to step 11.

A.Connect negative (-) black clamp to vehicle battery ‘s negative terminal.

B.Connect positive (+) red clamp to vehicle chassis or a solid, non-moving, metal vehicle component or body part. DO NOT clamp directly to positive battery terminal or moving part.

15.Replace worn or defective parts immediately - contact Vector Customer Service Department at (954)584-4446 or toll free at 866-584-5044.

2.2FIRST AID:

•SKIN: if battery acid comes in contact with skin, rinse Immediately with water, then wash thoroughly with soap and water. If Redness, pain, or irritation occurs, seek immediate medical attention.

•EYES: if battery acid comes in contact with eyes, flush eyes Immediately-for minimum of 15 minutes-seek immediate medical attention.

VEC016 specifications

The Vector VEC016 is a cutting-edge vehicle diagnostic tool designed for both professional mechanics and automotive enthusiasts. Renowned for its user-friendly interface and powerful features, the VEC016 brings advanced capabilities to the world of vehicle diagnostics, making it an indispensable tool in any workshop or garage.

One of the main features of the VEC016 is its ability to perform comprehensive vehicle scans. It is compatible with a wide range of vehicles, supporting various protocols and systems, including OBD-II, CAN, ISO9141, and KWP2000. This enables users to diagnose issues across multiple brands and models, ensuring that it remains relevant as automotive technology evolves.

The VEC016 is equipped with an intuitive touchscreen display that provides clear and concise information, making navigation simple and efficient. The tool can read and erase diagnostic trouble codes (DTCs) across engine, transmission, ABS, and airbag systems, making it versatile in addressing a variety of issues. The live data functionality allows users to view real-time information from the vehicle’s sensors, providing critical insights that can help diagnose recurring problems or fine-tune performance.

Another noteworthy technology featured in the VEC016 is its advanced graphical data representation. This feature allows mechanics to visualize data trends over time, making it easier to identify abnormalities and patterns that could indicate larger underlying issues. Additionally, the device supports freeze frame data, helping users understand the conditions that caused a specific diagnostic trouble code to trigger.

The VEC016 also includes features such as oil reset, EPB (electronic parking brake) reset, and SAS (steering angle sensor) calibration, which adds to its appeal for those involved in routine maintenance and calibration tasks. This makes the VEC016 an all-in-one diagnostic solution, eliminating the need for multiple tools.

With a robust build quality and rechargeable battery, the Vector VEC016 is designed for durability and convenience. Its portability allows mechanics to perform diagnostics on-site or in challenging environments, ensuring that assistance is always just a scan away.

Overall, the Vector VEC016 stands out as a powerful and versatile diagnostic tool, blending advanced technology with ease of use. Its array of features makes it an essential asset for anyone looking to maintain or repair modern vehicles effectively.