USRobotics 7924C manual 100-240VAC

Before You Begin

Note: For more information, you can also refer to the Support section of the USRobotics Web site:

www.usr.com/support

Note: Your model number is 7924C. It is important that you have your serial number written down before you install the 24-Port 10/100Mbps Switch. You can find your serial number on the bottom label of the switch and on the side of the package. If you ever need to call our Technical Support department, you will need this number to receive assistance.

Step 1. Connect the power cord to the 100-240VAC port on the switch, then plug the power cord into a standard power outlet.

100-240VAC

Step 2. Connect your 24-Port 10/100Mbps Switch to your Ethernet-ready device.

2	4	6	8	10	12	14	18	20	22	24	USRobotics
											24 Port 10/100 Ethernet Switch

1 3 5 7 9 11 13 15 17 19 21 23 8

Congratulations! The installation of your USRobotics 24-Port 10/100Mbps Switch is complete. As connections are established with the 24-Port 10/100Mbps Switch, the corresponding LED lights will turn on. Repeat this step as needed for up to twenty-three additional devices.

2