S Registers
S0 | * Number of rings to answer on (0) |
S1 | Counts number of rings (0) |
S2 | * Defines escape code character (43) |
S3 | * Defines carriage return character (13) |
S4 | * Defines line feed character (10) |
S5 | * Defines backspace character (8) |
S6 | * Sets number of seconds modem waits before dialing (2) |
S7 | * Sets number of seconds modem waits for a carrier (60) |
S8 | * Comma delay time in seconds (2) |
S9 | * Carrier recognition time in tenths of a second (6) |
S10 | * Carrier Loss time in tenths of a second (7) |
S11 | * Touch tone spacing (mSec) (70) |
S12 | * Escape code time (1/50sec) (50) |
S13 | * Bit mapped (0) |
1 | Reset on DTR drop |
2 | Reset |
4 | Set backspace key to delete |
8 | Do DS0 on DTR |
16 | Do DS0 on reset |
32Disable V.32bis ASL mode
64Disable Quick Retrains
128Disconnect on escape code
S15 * Bit mapped (0)
1Disable ARQ/MNP for V.22
2Disable ARQ/MNP for V.22bis
4Disable ARQ/MNP for V.32 and V.32bis
8Disable MNP Handshake
16Disable MNP level 4
32Disable MNP level 3
64Special MNP incompatibility
128Disable V.42
136Disable Initial V.42 phase detection
S16 | Bit mapped (0) |
2 | Touch tone test |
4 | Use internal test pattern |
S18 | Test Timer (sec) (0) |
S19 | * Inactivity |
S21 | * Break length (1/100sec) (10) |
S22 | * ASCII Code for XON character (17) |
S23 | * ASCII Code for XOFF character (19) |
S25 | * DTR minimum pulse width (1/100sec) (20) |
S27 | * Bit mapped (0) |
1 | V21 mode |
2 | Enable non trellis code V.32bis |
4 | Disable V.32 |
8 | Disable 2100 |
16Enable V.23
32Disable V.32bis
128Software Compatibility Mode
S28 * Multimode training program (8)
0Eliminates the V.32 answer tones for faster connection
11