QVS AS-154P user manual Introduction, Features

Introduction AS154P

Introduction

AS-154P reversible auto switch allows either 4-IN-l-OUT or l-IN-4-OUT configuration. It helps to solve the problem between multiple users and multiple peripherals with the minimum cost. This unit has ATEN’s latest ASIC technology which is both reliable and power free.

FEATURES:

Reversible.

Non-Powered.

Compact size.

Transparent to user.

Easy to install.

Win 3.1/95/NT, DOS Resident software include.

Built-in powerful ASK.

FCC class B certificated.

Unique broadcast mode supported.

For 4-IN-I-OUT Mode

4->I MANUAL MODE OFF 1 ON 1 25 SEC.

OFF 1OFF 1 60 SEC.

Table A DIP switch

No&: (I) FormFeedselection and Timeout selection are available in “AUTO”mode (SWI=OFF) only

(2)Slide switch selecrion is uvuilable in Manucrl mode (SW1 =ON, SW2=OFF) only.

For I-IN-4-OUT Mode

DIP SWITCH FUNCTION TABLE

SW1 1 SW2 1 SW3 1 SW4 1 FUNCTION

O N 1 ON 1 X 1 X 1 I-AMODE

Table B DIP switch

Note: (I) FormFeedselection and Timeout selection are not uvuilable in 1 -to-4 mode

(2)To function properly, ull printers must be powered on or AS-154P be powered by on udopter

(3)Set up the slide switch before AS-154P powering on (from cold-reset).

(4)AS/2 WARE can be found on the floppy disk, check READ.ME

file for detail.

- 1 -