QVS AS-154P user manual Installation For 4-To-l Mode, Fig. a 4-IN- 1 -OUT configuration

Installation AS-154P

Installation (For 4-To-l Mode)

•Select desired operation by DIP switch and slide switch.

•Turn off all PCs and printer.

•To connect PCs to AS- 154P use DB-25 male-to-male cables.

•To connect AS-154P to printer, use 25pin-to-36-pin male-to-male cable.

•Turn on all PCs and printer and AS-154P is ready.

*Scanning LED indicating AS-154P is in Auto Link mode.

*Non-scanning LED indicating AS154P is in Manual mode or prints data in Auto mode.

Fig. A 4-IN- 1 -OUT configuration

-2-