QSC Audio HPR152F, HPR153F, HPR151W, HPR181W, DSP-30 manual Use RS-232 Pinout

Page 19

Use: RS-232 Pinout

RS-232 Pinout:

The diagram below shows the pin assignments for the female RS-232 connector on the DSP.

Pin	Signal Description
1	DCD
2	TD
3	RD
4	DTR
5	GND
6	DSR
7	RTS
8	CTS
9	Contact Closure

*Note! Pin 9 is used for contact closure input. This pin is not normally used by RS- 232 devices. Some laptop and desktop computer COM ports have been observed to “pull” pin 9 to ground; this will cause unexpected behavior of the contact closure function if pin 9 is not disconnected on the PC end of the cable. If this behavior is observed, make sure that pin 9 is disconnected on the PC end of the cable.

Image 19

Contents Hardware Manual DSP-30Federal Communications Commission FCC Information Explanation of Graphical SymbolsTable of Contents Rear Panel Introduction Overview and IllustrationsOverview Front PanelDimensions Introduction Illustrations and DimensionsMounting Installation Unpacking and MountingSupport the Rear for Portable/Mobile Installations UnpackingBalanced Installation Balanced Audio ConnectionsXLR TRS 1/4-inch Installation Unbalanced Audio ConnectionsUnbalanced TS 1/4-inch phoneAudio Connections Installation Connecting Audio Inputs and OutputsBasic Audio Connections Connecting to the RS-232 Port Installation Connecting to the RS-232 PortSoftware Installation Installation System Requirements and Software InstallationSystem Requirements Front Panel Use Control, Indicator, and Connector DescriptionsRear Panel Preset Selections buttons AC power receptacleYou may select configurations from the sample files *.cfg Use General Use Guidelines and Preset DescriptionFactory Presets Within Signal Manager or create your ownHow to Save Presets into the DSP-30 Use Saving Presets Using QSC’s Signal Manager softwarePresets Configuring the DSP-30’s PresetsTo Recall a Preset Use How to Recall a Preset from the Front PanelAdditional Tips To Unlock Front Panel Buttons Use Lock OUT FeatureLock Indicator UnlockedContact Closure Feature Use Contact Closure FeatureWiring Diagram for Contact Closure RS-232 Pinout Use RS-232 PinoutUse Application Example Use Application Example RS-232 Port Audio Converters 24 bit, 48 kHzContact Closure Input sense Gain Structure balanced input and output Signal Processing CapabilitiesGeneral Architect’s and Engineer’s Specification Product Warranty CleaningUser Maintenance Warranty InformationPage

Related manuals

Manual 28 pages 61.42 Kb

HPR152F, HPR153F, HPR151W, HPR181W, DSP-30 specifications

The QSC Audio DSP-30 is a powerful digital signal processing platform designed for a wide range of audio applications, particularly in professional audio environments such as live sound, installation, and broadcast. Renowned for its exceptional audio performance and versatility, the DSP-30 provides users with advanced control over audio signals, ensuring that sound quality meets the highest standards.

One of the standout features of the DSP-30 is its robust processing capabilities. With up to 30 channels of audio processing, it allows users to manipulate both live and recorded audio seamlessly. The unit supports various input and output configurations, giving sound engineers the flexibility to adapt to multiple setups and environments.

The DSP-30 incorporates an array of advanced algorithms and processing tools, including equalization, compression, limiting, and delay functionality. These tools enable users to fine-tune audio signals for optimal clarity and impact, ensuring that performances remain consistent and engaging regardless of the venue size or acoustics.

Moreover, the DSP-30 utilizes QSC's exclusive Intrinsic Correction technology, which optimizes loudspeakers for their specific acoustic environment. This feature helps to eliminate unwanted resonances and provide an enhanced listening experience. By tailoring the audio output to the room's characteristics, the DSP-30 ensures uniform sonic quality throughout the space.

In addition, the device boasts comprehensive networking capabilities. With built-in support for Q-SYS and Dante protocols, users can easily integrate the DSP-30 into existing audio networks. This connectivity allows for remote management and control, enhancing workflow efficiency and enabling system monitoring from virtually anywhere.

The user interface of the DSP-30 is designed for ease of use, featuring a clear display and intuitive navigation. Users can effortlessly configure their audio settings and access presets designed for various applications, from small presentations to large-scale concerts.

Durability and reliability are paramount in the DSP-30’s design. Built with high-quality components, the unit is engineered to withstand the rigors of regular use in demanding environments, making it a trusted choice for audio professionals.

Overall, the QSC Audio DSP-30 combines innovative technologies with a user-friendly interface, making it an essential tool for anyone looking to achieve exceptional audio performance in a variety of settings. Its flexibility, advanced processing features, and integration capabilities position it as a leader in the digital audio processing domain.