Setting an Initial IP Address | Perle Systems DS1 specs

Setting an Initial IP Address

This section describes the different methods you can use to set the Device Server IP address.

Following is a list of methods for setting the Device Server IP address and a short explanation of when you would want to use that method:

zDeviceManager—Use this method when you can connect the Device Server to the network and access the Device Server from a Windows® PC. The DeviceManager is a Windows-based application that can be used for Device Server configuration and management.

zDirect Connection—Use this method when you can connect the Device Server directly to a dumb terminal, essentially logging directly into the Device Server. Using this method, you will need to configure and/or manage the Device Server using either the Menu or CLI.

zDHCP/BOOTP—Use this method when you have a BOOTP or DHCP server running and you can connect the Device Server to your network.

zARP-Ping to assign a pinging it.

—Use this method when you can connect the Device Server to the network and want temporary IP address to the Device Server by specifying an ARP entry and then

zIPv6 Network—When the Device Server is connected to an IPv6 network, its local link address should automatically be recognized by the network.

Note: Regardless of which method you use, the Device Server must reside within the same network as the host you are accessing it from.

Once an IP address has been assigned to the Device Server, in most cases, you can continue to use the same method to configure and/or manage the Device Server. See Chapter 3, Configuration Methods on page 29 for more information on the different methods you can use to manage/configure the Device Server.

Using DeviceManager

To use the DeviceManager, you must first install it on a Windows 98/2000/NT/ME/Server 2003/XP operating system (Windows NT requires Service Pack 4 or later) that resides in the same network as the Device Server. The DeviceManager installation wizard can be found on the CD-ROM included in the Device Server package.

1.Connect the Device Server to the LAN.

2.From the CD-ROM that was included in the Device Server packaging, select the DeviceManager link.

3.Click on the link under Location and click Open to automatically start the DeviceManager installation.

4.Install the DeviceManager by following the installation wizard. On the last window, check the

Yes, I want to launch DeviceManager now. box and click the Finish button.

5.On the Manage Device Server tab, click the Search Local Network button.

6.Any Device Server that does not have an IP address will be displayed as Not Configured, with the Model and MAC Address to identify the Device Server. Highlight the Device Server that you want to assign an IP address to and click the Assign IP button.

7.Type in the IP address that you want to assign to this Device Server and click the Assign IP button.

Note: This is just a temporary IP address that you can use to open a session to the Device Server for configuration.

8.You are now ready to configure the Device Server. Double-click the Device Server you just assigned the temporary IP address to, to open a configuration session. Type superuser (the factory default Admin user password) in the Login window and click OK.

Installation 23

DS1 specifications

Perle Systems TS2 and DS1 are advanced serial-to-Ethernet devices designed to facilitate seamless integration of serial devices with modern IP networks. These devices serve as crucial tools for businesses looking to enhance their communication capabilities while leveraging existing infrastructure.

One of the standout features of the Perle TS2 and DS1 is their ability to support multiple serial protocols including RS232, RS422, and RS485. This versatile support allows businesses to connect various legacy devices to their networks, ensuring that critical equipment can still communicate effectively in an increasingly digital landscape.

The TS2 model is particularly noted for its dual serial ports, enabling simultaneous communication with multiple devices. This capability is invaluable for applications requiring real-time data transmission, such as remote monitoring and automated control systems. The DS1 model, on the other hand, is designed for single-port use, making it an ideal solution for smaller-scale operations or specific single-device connections.

Both the TS2 and DS1 incorporate advanced features such as configuration through a web interface, which simplifies setup and management. Users can easily access device settings and monitor performance metrics remotely, enhancing operational efficiency. These devices also support various network protocols such as TCP/IP, UDP, and ICMP, ensuring compatibility with a wide range of network architectures.

In terms of security, Perle Systems prioritize user data protection. The TS2 and DS1 offer features including SSL encryption and SSH protection, providing an added layer of security for sensitive information transmitted over the network. This is particularly important for industries where data integrity and security are paramount, such as healthcare and finance.

Additionally, the rugged design of both devices ensures reliable performance even in harsh environments. With extended temperature ratings and robust housing, the TS2 and DS1 can operate in diverse conditions without compromising functionality.

To summarize, the Perle Systems TS2 and DS1 provide a reliable and flexible solution for connecting legacy serial devices to modern networks. With their support for multiple serial protocols, web-based management, robust security features, and rugged design, these devices cater to a variety of industries looking to modernize their communication infrastructure while maintaining existing equipment. Whether for large-scale operations or smaller implementations, the TS2 and DS1 equip businesses with the tools needed for effective serial communication in an IP-driven world.