Clarion iDXZ775USB Basic Operations, To change sound mode, Adjusting the subwoofer output, Volume

: no sound effect

: Suitable for genuine speakers

: Suitable for separate speakers

: Suitable for co-axial speakers

English

Basic Operations

Adjusting Sound Mode	● Adjusting the subwoofer output
	volume

To change sound mode

1.Press the [ ] button and select the sound mode to adjust.

2.Push the [SEEK PANEL] leftward or rightward to select the “item name”.

When speaker system is “NORMAL”:

“S-W VOLUME” ↔ “DZE” ↔ “P.EQ” ↔

“BASS” ↔ “TREBLE” ↔ “S RESTORER” ↔ “HPF” ↔ “S-W LPF” ↔ “BALANCE” ↔ “FADER”

When speaker system is “3WAY”:

“S-W VOLUME” ↔ “DZE” ↔ “P.EQ” ↔

“BASS” ↔ “TREBLE” ↔ “S RESTORER”

↔“BALANCE”

When speaker system is “2WAY”:

“DZE” ↔ “P.EQ” ↔ “BASS” ↔ “TREBLE” ↔ “S RESTORER” ↔ “BALANCE” ↔ “FADER”

3.Push the [P.CH] button upward or downward to select the “desired setting

value”.

∗In the case of item names appearing with the “ENT” suffix after the item name, the

[ ] button must be pressed to display the setting value.

∗“P.EQ” can be adjusted only when the

“P.EQ ON/OFF” is set to “ON” (page 19) and “EQ SELECT” is set to “P.EQ” (page

∗“BASS” and “TREBLE” can be adjusted only when “DZE” is set to “DZE OFF” (page

12)and “EQ SELECT” is set to “B/T” (page

∗After completing settings, press the [ ] button to return to the previous mode.

Note:

•During sound adjustment mode, if no operation is performed for more than 10 seconds, this mode can be canceled and return to the previous mode.

You can adjust the volume output from the unit’s subwoofer output terminal.

“S-W VOLUME” can be adjusted only when “SUB WOOFER” is set to “ST” or “MONO” (page 19).

2-1. Select the “S-W VOLUME”.

3-1. Push the [P.CH] button upward or downward to change the output volume.

∗The factory default setting is “0”. (Setting range: +6 to –6)

●Setting the Digital Z-Enhancer

This unit are provided with 3 types of sound tone effects stored in memory. Select the one you prefer.

∗The factory default setting is “DZE OFF”.

2-1. Select the “DZE”.

3-1. Press the [ ] button.

3-2. Push the [SEEK PANEL] leftward or rightward to select the tone effect. Each time you push the [SEEK PANEL], the tone effect changes in the following order:

“DZE OFF” ↔ “DZE 1” ↔ “DZE 2” ↔ “DZE 3”

DZE OFF

DZE 1

DZE 2

DZE 3

3-3. When the “DZE 1”, “DZE 2” or “DZE 3” is set, push the [P.CH] button upward or downward to change the DZE level from +3 to –3.

∗The factory default setting is “0”.

12 DXZ775USB