Clarion iDXZ775USB owner manual Operations Common to Each Mode, To change adjustment setting

Operations Common to Each Mode

English

To change adjustment setting

1.Press and hold the [OPTION] button for 1 second or longer to switch to the adjustment selection display.

2.Push the [SEEK PANEL] leftward or rightward to select the “item name”.

“CLOCK EDIT” ↔ “COLOR” ↔

“CONTRAST” ↔ “SCREEN SAVER” ↔ “MSG INPUT” ↔ “AUTO SCROLL” ↔ “SCROLL SPEED” ↔ “DIMMER” ↔ “BLINK LED” ↔ “AMP CANCEL” ↔ “TEL-SPEAKER”↔ “TEL-SWITCH”↔

“SYSTEM CHECK”

3.Push the [P.CH] button upward or downward to select the “desired setting value”.

∗In the case of display appearing “ENT”, the

[ ] button must be pressed to display the setting value.

∗After completing settings, press the

[OPTION] button to return to the previous mode.

●Setting the clock

2-1.	Select “CLOCK EDIT”.
3-1.	Press the [	] button

3-2. Push the [SEEK PANEL] leftward or rightward to select the hour or the minute.

3-3. Push the [P.CH] button upward or downward to set the correct time.

∗The clock is displayed in 12-hour format.

3-4. Press the [	] button to store the
time into memory.

Note:

•You cannot set the clock when it is displayed with only the ignition on. If you drain or remove the car’s battery or take out this unit, the clock is reset. While setting the clock, if another button or operation is selected, the clock set mode is canceled.

●Setting the button illumination

2-1. Select “COLOR”.

3-1. Press the [ ] button.

3-2. Push the [SEEK PANEL] leftward or rightward to select the color type in the following orders:

“COLOR SCAN” ↔ “Indigo Blue” ↔ “Surf Blue” ↔ “Silky White” ↔ “Aqua Green” ↔ “Fresh Green” ↔ “Leaf Green” ↔ “Warm Amber” ↔ “Passion Red” ↔ “Vivid Pink”

↔“Pale Pink” ↔ “Dark Violet” ↔ “Pure Purple” ↔ “USER COLOR 1” ↔ “USER COLOR 2” ↔ “USER COLOR 3” ↔ “COLOR SCAN” ...

•Setting COLOR SCAN mode

As selecting “COLOR SCAN”, the color automatically changes.

∗The factory default setting is “COLOR SCAN”.

∗After 3 seconds the color changes to the other.

• Setting USER mode

The factory default setting is “RED 8” (red), “GREEN 8” (green), “BLUE 8” (blue).

As selecting “USER COLOR 1, 2, 3”, press the [OPTION] button to enter the setting.

1.Push the [SEEK PANEL] leftward or rightward to select “RED”, “GREEN” or “BLUE”.

2.Push the [P.CH] button upward or downward to select from 0 to 8.

3. Press and hold the [			] button for 2
seconds or longer to		store the color in
memory and return to the previous mode.
COLOR	RED		GREEN	BLUE
	(red)		(green)	(blue)
Indigo Blue	0		0	8
Surf Blue	0		4	8
Silky White	8		8	7
Aqua Green	0		8	2
Fresh Green	0		8	0
Leaf Green	3		8	0
Warm Amber	8		3	0
Passion Red	8		0	0
Vivid Pink	8		0	3
Pale Pink	8		2	3
Dark Violet	3		0	8
Pure Purple	6		0	8
USER COLOR 1	8		8	8
USER COLOR 2	8		8	8
USER COLOR 3	8		8	8

26 DXZ775USB