Clarion XMD2, XMD1 owner manual Handling Compact Discs

6. HANDLING COMPACT DISCS

This unit has been designed specifically for playback of compact

discs bearing the mark. No other discs can be played.

To remove the compact disc from its storage case, press down on the center of the case and lift the disc out, holding it carefully by the edges.

Removing the disc	Proper way to hold
	the compact disc

Always handle the compact disc by the edges. Never touch the sur- face.

To remove fingermarks and dust, use a soft cloth, and wipe in a straight line from the center of the compact disc to the circumfer- ence.

Note on Compact Discs

Never stick labels on the surface of the compact disc or mark the surface with a pencil or pen.

No

Do not use any solvents such as commercially available cleaners, anti-static spray, or thinner to clean compact discs.

No

No

New discs may have some roughness around the edges. The unit may not work or the sound may skip if such discs are used. Use a ball-point pen, etc. to remove roughness from the edge of the disc.

Ball-point pen

Roughness

Do not use compact discs that have large scratches, are misshapen, or cracked, etc. Use of such discs will cause misoperation or dam- age.

No

Do not expose compact discs to direct sunlight or any heat source.

No

Note:

•Do not use commercially available CD protection sheets or discs equipped with stabilizers, etc. These may get caught in the internal mechanism and damage the disc.

XMD1/XMD2 5