Introduction, Front View | Omega Vehicle Security DPC10-CS specification

INTRODUCTION

Your OMEGA DPCl 0-CS or DPCIO-CC is a counter with an eight-digit LCD display. A programmable scaler and decimal point allow for display in any engineering unit.

	Plastic	FRONT VIEW
	Plastic
	front panel-
	sealed to	8-digit LCD
	meet	display
	NEMA-4X
	Programming	I Reset/
	Programming	Programming
	button	Programming
	button	button
		button
		REAR VIEW

APPLICATION

You must make certain programming and wiring choices to accomplish your application. We recommend the following sequence:

1.Answer the following questions:

??W hat type ofsensor will be used?

??What engineering units should the counter be scaled to?

??How many pulses per item is the sensor providing?

??Is a decimal point needed on the display?

2.Calculate the scale factor.

MOUNTING

1 ‘~‘lnstall mounting clip

PROGRAM MODE

NOTE: To enter the program mode, you must connect a jumper between terminals 1 and 5 (see page 4). To leave the program mode, disconnect the jumper.

Screens

There are four program-mode screens in the DPCl 0-CS and DPClO-CC. Upon entering the setup mode, thecounterwill

display screen 1. Press and hold the 141 key while repeatedly pressing them key to advance to successive screens.

OPERATION

Add/Subtract Counting

There are two count input terminals on the rear of the totalizer. Count pulses entering Input A (terminal 3) cause the total to decrement (count down). Count pulses entering Input B (terminal 2) cause the total to increment (count up). The totalizer may start counting from zero, when reset, or may start from a user-programmed offset value. The offset value is a positive number and may be up to six digits.

If only one of the count inputs is used, the totalizer becomes an up counter with a range of zero to 99,999,999, or a down counter with a range of zero to -9,999,999. If both inputs are used, the totalizer displays the difference count between the two inputs-counts at Input B are added, counts at Input A are subtracted. In this mode of operation, the totalizet ’srange is -9,999,999 to 99,999,999. Positive numbers are not indi- cated with a plus sign(+). Both inputs may occur simulta- neously, in which case the displayed total does not change.

Count Inputs

The DPClO-CS has hi-speed inputs and can accept pulses from solid state, current sourcing sensors at up to 10 kHz per input. The sensor must supply at least +2.0 V dc, but not more than +28 V dc to the input. Counts are entered on the positive-going edge of the pulse.

The DPClO-CC has low speed inputs and can accept pulses from solid state, current sinking sensors or contact closures to ground at up to 20 Hz per input. These inputs are internally pulled up to +3 V dc. The sensor must be capable of sinking current from the input to bring the input voltage down to +0.4 V dc or less. Counts are entered on the negative-going edge of the pulse.

Page 2

DPC10-CS specifications

The Omega Vehicle Security DPC10-CS is an advanced car security system designed to provide comprehensive protection against theft and unauthorized access. This system is particularly suited for individuals who prioritize vehicle safety and features an array of state-of-the-art technologies to safeguard vehicles effectively.

One of the standout features of the DPC10-CS is its dual zone shock sensor. This technology detects any tampering or disturbances around the vehicle, triggering an alarm to deter potential thieves. The sensitivity of the shock sensor can be adjusted according to the user's preference, ensuring it adapts to varying environmental conditions.

Another notable characteristic of the DPC10-CS is its ability to control the vehicle’s central locking system. This feature allows for secure locking and unlocking, providing peace of mind when leaving the vehicle unattended. Additionally, the system includes an immobilizer function that prevents the engine from starting without the correct key, adding an extra layer of security against theft.

The DPC10-CS is equipped with a user-friendly remote control, allowing easy access to vehicle functions. This remote not only controls the locking mechanisms but also activates the alarm system from a distance, enabling users to monitor their vehicle's security status conveniently. The remote typically features LED indicators that provide visual feedback on the system's status.

Another innovative aspect of this security system is its programmable features. Users can tailor the settings to meet their specific security needs, including adjusting the alarm siren duration, sensitivity levels, and alarm triggers. This flexibility ensures that the security system performs optimally in various scenarios.

The installation of the Omega Vehicle Security DPC10-CS is straightforward, making it accessible for professional installers and vehicle enthusiasts alike. The system is designed to integrate seamlessly with most vehicles without causing any damage or voiding warranties.

In conclusion, the Omega Vehicle Security DPC10-CS combines cutting-edge technologies and user-friendly features to create a robust vehicle security solution. Its shock sensors, remote control capabilities, and programmable options make it an exceptional choice for those seeking to enhance their vehicle's security while maintaining convenience. With the DPC10-CS, vehicle owners can feel confident that their investment is well protected against potential threats.