Ratoc Systems CFU2 manual Introduction, Features

Page 3

1.Introduction

The CFU2 is a USB1.1 Host CF card for use in CF Type II card enabled PDA. This User’s Guide describes how to install, use the CFU2. The information in the README file in the CD-ROM may include newer information. For the latest information, go to our home page.

http://www.ratocsystems.com/english/

1-1. Features

•Just insert the CFU2 into a CF slot and USB1.1 Host Interface will be available.

•USB HID Driver and USB Mass Storage Class Driver are included. The drivers allow you to use USB keyboards, USB bar code readers, USB Flash disks, etc.

•Power-saving design enables to run battery-driven PDAs for a long time.

•Support both 3.3V and 5V operation.

•CFU2 dongle cable is detachable from the CFU2 CF card.

•RoHS compliant.

1

Page 2 Page 4
Image 3
Page 2 Page 4
Contents CFU2 Installation Uninstallation Registration and Tech-Support SpecificationsIntroduction FeaturesSystem Requirements and Restrictions Package ConfirmationUSB Device Support Before installation Installation Confirming a folder structure Connecting the PDA to the PC with ActiveSyncCFU2 Host Driver Set Up CFU2 HID Driver Set Up CFU2 Mass Storage Driver Set Up Uninstallation Registration and Tech-Support How to Register Software Update and SupportCFU2 USB1.1 Host CF Card SpecificationsTrademarks Appendix
Top Page Image Contents