Ratoc Systems manual Specifications, CFU2 USB1.1 Host CF Card

Page 14

5. Specifications

CFU2 USB1.1 Host CF Card

Bus Interface : CF+ and CompactFlash Specifications Rev1.4

USB Interface: USB 1.1 Host Port(12Mbps/1.5Mbps)

Connector: USB1.1 series A(Female) x 1

Max Bus Power: 100mA

Power Consumption : 3.3V/5V

34mA at 3.3V(without any device connected) 27mA at 5V(without any device connected)

Operating Requirements: Temperature 32 to 131°F(0 to 55°C)

Relative Humidity 10 to 80%(non-condensing) Size: 1.68 in (42.8 mm) (W) x 1.43 in (36.4 mm) (D) x 0.19 in (4.9 mm) (H) Cable length: 3.93 in (10 cm)

USB1.1 Host Driver

Host Interface : Original Class

Transfer Protocol : Control, Bulk, Interrupt transfer

Mass Storage Driver

Transfer Protocol : BOT(Bulk Only Transfer)

12

Image 14
Contents CFU2 Uninstallation Registration and Tech-Support Specifications InstallationFeatures IntroductionPackage Confirmation System Requirements and RestrictionsUSB Device Support Before installation Installation Connecting the PDA to the PC with ActiveSync Confirming a folder structureCFU2 Host Driver Set Up CFU2 HID Driver Set Up CFU2 Mass Storage Driver Set Up Uninstallation How to Register Software Update and Support Registration and Tech-SupportSpecifications CFU2 USB1.1 Host CF CardAppendix Trademarks