Omega Vehicle Security OMG-COMM2-EX manual Headers E3 and E4

Page 9

Card Setup

Set the jumper to ‘S’ if you are using more than one OMG-COMM2-EXin a bus or you wish to completely remove the pull-down resistor for hardware compatibility. Setting the adapter in this configuration when it is not accompanied by a pull-down resistor will prevent the ports from triggering an interrupt.

E10

 

 

N

S

M

E9

 

 

N

S

M

Figure 6 - Headers E9 and E10, Sharing IRQ’s with another adapter

Headers E3 and E4

Position ‘A’ Determines whether the RS-485 driver is enabled by the UART signal Request To Send (RTS) or always enabled. With the jumper installed in position ‘A’, RTS enables the driver. Removing the jumper enables the driver regardless of RTS. E4 sets Port 1 while E3 sets Port 2. This jumper should only be set to ‘A’ if you are running the board in a multi-drop polled environment such as RS-485, and you have software that ‘knows how to talk’ on the RS-485 bus. For normal point-to-point RS-422 (such as terminal emulation), make sure that a jumper at position ‘A’ is not in place.

Positions ‘B’ & ‘C’ determine whether the board provides a direct ground connection (as in RS-232 and most RS-422), or a 100 ohm high impedance ground. The high impedance ground is normally used by RS-485 (and some RS-

422)to avoid ground loop currents with long cables. Position ‘B’ selects the direct ground and position ‘C’ selects the 100 ohm high impedance ground.

A B CA B C

Figure 7 - Headers E3 and E4 (Factory Default

OMG-COMM2-EX

Page 5

Page 8 Page 10
Image 9
Page 8 Page 10
Contents User’sGuide Mexico CanadaBenelux Czech RepublicContents Figures Introduction Factory Default SettingsOverview What’s IncludedAddress Selection Card SetupInterface Selection RS-422/485 Port Enable / DisableRS-232 IRQ SelectionE10 Interrupt ModesHeaders E9 and E10, Sharing IRQ’s with another adapter Headers E3 and E4Installation Operating System Installation For Windows UsersOther Operating Systems Modem Control Signal Considerations FeaturesTechnical Description Line TerminationRS-422/485 Male DB9 Connector Pin Assignments RS-232 Male DB9Specifications Appendix a Troubleshooting Appendix B How To Get Assistance RS-422 Appendix C Electrical InterfaceRS-485 Appendix D Asynchronous Communications Asynchronous Communications Bit DiagramAppendix E Silk-Screen Appendix F Compliance Notices WARRANTY/DISCLAIMER Temperature

OMG-COMM2-EX specifications

The Omega Vehicle Security OMG-COMM2-EX is a state-of-the-art vehicle security system designed to offer unparalleled protection and convenience for vehicle owners. This cutting-edge system integrates advanced technologies and features that ensure optimal safety and usability.

One of the standout features of the OMG-COMM2-EX is its robust two-way communication capability. This allows users to remotely control and monitor their vehicles through a user-friendly interface. The system employs a high-frequency radio signal which provides reliable communication over extended distances, making it ideal for urban environments where traditional methods may falter.

The OMG-COMM2-EX system is equipped with a comprehensive security suite that includes perimeter monitoring, motion detection, and shock sensors. These sensors work together to detect unauthorized entry or tampering with the vehicle, alerting the owner immediately via notifications on their mobile device. The system's response is rapid, providing an extra layer of security that can deter potential thieves effectively.

Another noteworthy characteristic of the OMG-COMM2-EX is its easy installation process. Designed with usability in mind, this system can be fitted into a wide variety of vehicles without the need for extensive modifications or complex wiring. Coupled with a detailed installation guide, vehicle owners can have peace of mind knowing that their system is installed correctly, enhancing overall security.

In addition to its security features, the OMG-COMM2-EX also offers convenience through its integration with smart devices. Users can control various functions such as remote start, keyless entry, and vehicle immobilization from their smartphones, making daily operations seamless. The system also offers programmable features, allowing users to customize the alerts and notifications they receive based on personal preferences.

The technology behind the OMG-COMM2-EX includes advanced algorithms that enhance the accuracy of its sensors, reducing false alarms and enhancing reliability. This aspect is particularly important for urban users who may face environmental challenges that could trigger less sophisticated systems.

Overall, the Omega Vehicle Security OMG-COMM2-EX offers a compelling combination of security, convenience, and advanced technology. With features designed to protect vehicles from theft while providing ease of use for owners, it represents a significant advancement in vehicle security solutions. The integration of smart technology enhances user experience, making the OMG-COMM2-EX an excellent choice for anyone looking to safeguard their vehicle effectively.
Top Page Image Contents