NetComm NP3005 manual Features

Page 5

Features

The NetComm 5-Port 1000BASE-T Gigabit Ethernet Switch has been designed for easy installation and high performance in an environment where traffic on the network and the number of users increase continuously.

■5 x 1000Base-T Gigabit Ethernet ports

■Supports Auto-Negotiation for 10/100/1000Mbps and duplex mode

■Supports Auto-MDIX for each port

■Support Full/Half duplex transfer mode for 10 and 100Mbps

■Support Full duplex transfer mode for 1000Mbps

■Full wire speed reception and transmission

■Store-and-Forward switching method

■Supports 8K absolute MAC addresses

■Supports 256KBytes RAM for data buffering

■Extensive front-panel diagnostic LEDs

■IEEE 802.3x flow control for full-duplex

■Back pressure flow control for half-duplex

Rev.1 - YML671

www.netcomm.com.au

NP3005 - 5 Port Gigabit Switch

Page 5

Image 5
Contents Page Contents Introduction Gigabit Ethernet Technology Features Package Contents Front Panel LED IndicatorsRear Panel Twisted pair cables RJ-45 Network portsStraight and crossover cable configuration Application examples Basic Desktop Network SwitchConnecting One NP3005 to another existing network switch Cascading the switchPreparation before connecting your switch Verifying installation Attaching computers to the switchConnecting power to the switch CSMA/CD NB3005 SpecificationsContact Information Registering your NetComm ProductTick Mark declaration of conformance Trademarks and NoticesWarranty Registration Form Page Limitations of Warranty Product Warranty