NETGEAR PS101 manual Print Server

Page 8

4

Configure a Computer To Access the

Print Server

Before using the PS101 on your network, each computer that needs to access the print server must have:

•A connection to the network.

•The printer added using the NETGEAR Add Printer Wizard.

•Either the printer driver software already installed or, if this is a new printer, access to the printer driver software (either on a CD or downladed to a disk).

To install the Add Printer Wizard (for a non-administrative computer):

Note: You can skip ahead “To configure computers...” if you have already installed the NETGEAR software on this computer.

1.Insert the PS101 Printer Server Resource CD in the CD-ROM drive. NETGEAR Print Server Software Installation wizard starts up automatically. If it doesn’t, double-clickMy Computer, double-click your CD-ROM drive, and double-clickSetup.exe.

2.Follow the instructions in the installation wizard to install the software.

3.When asked, select only the NETGEAR Add Printer Wizard.

4.Click Finish.

6

Page 7 Page 9
Image 8
Page 7 Page 9
Contents Installation Guide Technical Support NETGEAR, INCInstallation Procedure Overview IntroductionUnpack the Box and Verify the Contents Connect the Print Server Turn the printer onSetup the Print Server Click Finish To set up the print serverAdvanced Settings Settings should workPrint Server To configure computers running Windows NT, 2000, and XP To configure computers running Windows 95, 98, and Me Alert light is lit TroubleshootingLink light is not lit Can not print from my computer Glossary of Terms Mini Print Server System RequirementsMini Print Server Specifications Environmental SpecificationsStatement of Conditions
Top Page Image Contents