Setup the Print Server | NETGEAR PS101 instruction

3	Install Printer Server Software and
	Setup the Print Server

The PS101 comes with several software components that allow you to set up the print server and use administrative tools. You should install all the software onto one Windows computer to act as the print server administrator. For the other computers, only install the NETGEAR Add Printer Wizard as described in procedure 4.

To install the NETGEAR Print Server software:

1.Insert the PS101 Printer Server Resource CD in the CD-ROM drive. NETGEAR Print Server Software Installation wizard starts up automatically. If it doesn’t, double-clickMy Computer, double-click your CD-ROM drive, and double-clickSetup.exe.

2.Follow the instructions in the installation wizard to install the software.

3.For the administrative computer, install all components.

Note: If this computer will just use the printer, only select the NETGEAR Add

Printer Wizard. See procedure 4:Configure a Computer To Access the Print Server

for details.

4.Click Finish.

To set up the print server:

1.Click Start. Point to Programs and click NETGEAR Print Server>NETGEAR Print Server

Setup Wizard.

2.Follow the instructions in the installation wizard to set up the print server.

\If you have questions, click Help for information about a specific screen.