ReadyNAS Pro Business Edition User Guide
is detected. Selecting the
SNMP. If you utilize an SNMP management system such as HP OpenView or CA UniCenter to monitor devices on your network, you can set up the ReadyNAS Pro Business Edition device to work within this infrastructure.
Figure
To set up SNMP service:
1.Select the SNMP tab to display the SNMP settings.
2.Select the Enable SNMP service check box. You can leave the Community field set to public, or specify a private name if you have opted for a more segregated monitoring scheme.
3.Enter a host name or an IP address in the Trap destination field. This is where all trap messages will be sent. The following system events generate a trap:
•Abnormal power voltage
•Abnormal board enclosure temperature
•Fan failure
•UPS connected
•UPS detected power failure
•RAID disk sync started and finished
•RAID disk added, removed, and failure
•Snapshot invalidated
4.If you wish to limit SNMP access to only a secure list of hosts, specify the hosts in the Hosts allowed access field.
5.Click Apply to save your settings.
When you have saved the SNMP settings on the ReadyNAS Pro Business Edition, you can import the NETGEAR SNMP MIB to your SNMP client application. The NETGEAR MIB can be
Setting Up and Managing Your ReadyNAS Pro |