NETGEAR FA310TX manual Install the Network Card

Page 4

Install the Network Card

Note: Touch a grounded metal object to free yourself of static electricity before you handle the network card.

1.Turn the power off and unplug the power cord from your computer.

2.Remove the PC cover.

3.Choose an available PCI slot (PCI slots are the shorter slots) and remove the corresponding back plate from the PC chassis.

4.Insert the network card into the PCI expansion slot.

Note: To avoid damaging any components on the network card, handle it by the edges, using your thumbs to push it securely into the PCI slot. Make sure the network card is fully inserted into the slot to prevent the PC operating system from freezing at startup.

5.Fasten the network card to the rear of the computer chassis by tightening the screw that is on the PC.

6.Replace the PC cover and reconnect the power cord to the PC.

Network card

Back plate removed

7983FB

Model FA310TX Network Card Installation Guide

Page 3 Page 5
Image 4
Page 3 Page 5
Contents Page Start Here Verify Package Contents Install the Network Card Connect the Network Cables Install the Windows 95 Network Driver Turn on the power to the computer and start Windows Click on Finish Verify Installation Model FA310TX Network Card Installation Guide Technical Specifications Standards CompatibilityHardware Warranty Information Model FA310TX Network Card Installation Guide FA3105XNA-3
Top Page Image Contents