NETGEAR FA310TX manual Install the Windows 95 Network Driver

Page 6

Install the Windows 95 Network Driver

This guide provides instructions for installing the Windows 95 Network Driver. All versions of Windows 95 might not respond with the same screens. Therefore, windows that are different from those shown in these instructions might open but prompt you for the same information, and windows might open in a different order than the order of the steps in these instructions.

Note: You must install the network card (instructions on other side of this guide) before installing the network driver.

You need to have the Windows 95 CD-ROM and the FA310TX Drivers and Diagnostics Disk ready to use in the installation process.

If you have not yet named your PC and your network, before you proceed with the installation steps, decide on a name for your network and for each PC. When the “Network” window opens, it prompts you to “... provide computer and workgroup names....” Click on “OK.” The second “Network” window opens

and prompts you for the names. Enter a name (a different one-word name for each computer) in the “Computer name” entry field; enter a workgroup name (the name of your entire network) in the “Workgroup” entry field. Click on “OK” or “Close.”

Note: If the “Insert Disk” window opens and the “Please insert the disk labeled Windows 95...” message appears at any time during the installation process, insert the Windows 95 CD-ROM in Drive D (the CD-ROM drive) and click on “OK.” Then follow the next step in the instructions.

Model FA310TX Network Card Installation Guide

Image 6
Contents Page Start Here Verify Package Contents Install the Network Card Connect the Network Cables Install the Windows 95 Network Driver Turn on the power to the computer and start Windows Click on Finish Verify Installation Model FA310TX Network Card Installation Guide Technical Specifications Standards CompatibilityHardware Warranty Information Model FA310TX Network Card Installation Guide FA3105XNA-3