NETGEAR GA311 user manual PCI Bios Parameters

Page 36

NETGEAR 10/100/1000 Mbps Gigabit Ethernet Adapter GA311 User Manual

Table 3-3. PCI BIOS Parameters

Parameter	Setting

Bus-Master	Enabled

Interrupt	Set to any IRQ that does not conflict with another device
number

Latency timer	Recommended range is between 20 and 255. This parameter is typically
	set to 64

•Try inserting the network adapter in another slot. If the new position works, the original slot in your system may be defective.

•Replace the failed network adapter with one that is known to work properly. If the second adapter works in the slot where the first one failed, the original adapter is probably defective.

•Install the network adapter in another functioning system and run the tests again. If the adapter passed the tests in the new system, the original system may be defective.

•Remove all other network adapters from the system and run the tests again. If the adapter passes the tests, the other adapters might be causing the conflict.

3-6

v1.0, February 2007

Image 36

Contents NETGEAR, Inc Technical Support Contents Appendix C Related Documents Index About This Manual Conventions, Formats and ScopeHow to Use This Manual How to Print this ManualRevision History Viii Chapter Introduction Key Features and Related Netgear Products What’s in the Box? Hardware Description Chapter Basic Setup What You Need Before You BeginVerifying System Requirements Preparing to Install Your GA311 Gigabit Ethernet Adapter Selecting the Network CableBasic Installation Instructions Installation OrderFirst, install the GA311 Gigabit Ethernet Adapter For Windows Vista UsersTHEN, Install the GA311 Software V1.0, February For Windows XP, 2000, Me, and 98SE Users Next, install the GA311 Gigabit Ethernet Adapter For Windows NT 4.0 Users Installing a GA311 Network Settings Accept the Default Speed & Duplex V1.0, February Moving the GA311 to a Different Slot in Windows NT Updating the Driver Software in Windows NTViewing the Physical Connection Indicators Determining the GA311 Connection StatusInstalling the GA311 Smart Wizard Utility GA311 Port LED ActivityV1.0, February V1.0, February V1.0, February Chapter Configuration and Troubleshooting Understanding the Configuration OptionsConfiguring Optional Adapter Properties V1.0, February Basic Troubleshooting Tips Checking the Port LEDsUsing a Troubleshooting Checklist PCI Bios Parameters Appendix a Technical Specifications Ieee 802.1Q VlanV1.0, February Appendix B Manual Driver Installation For Windows Vista and XP Users Installing a GA311 V1.0, February For Windows 2000 & 98SE/Me Users Installing a GA311 Found New Hardware Wizard V1.0, February For Windows NT 4.0 Users Installing a GA311 Network Settings Accept the Default Speed & Duplex V1.0, February Appendix C Related Documents Document LinkReference Manual for the ProSafe VPN Firewall 200 FVX538 Index NumericsIndex-2

GA311 specifications

The NETGEAR GA311 is a high-performance Gigabit Ethernet adapter designed to enhance the network capabilities of desktop computers, servers, or workstations. This device is particularly useful for users who want to upgrade their existing network interface or extend their connectivity options with reliable Gigabit speeds.

One of the most notable features of the GA311 is its ability to achieve data transfer rates of up to 1,000 Mbps, which significantly improves network performance compared to standard Fast Ethernet connections. The adapter operates using the PCI Express (PCIe) interface, allowing for quick and efficient data exchange between the network and the computer's motherboard.

The GA311 supports a variety of beneficial technologies, notably Wake-on-LAN (WoL) and jumbo frames. Wake-on-LAN enables remote systems to be awakened over the network, which is particularly useful for IT management and remote access setups. The support for jumbo frames allows for larger packet sizes than typical Ethernet frames, which can lead to enhanced throughput and reduced CPU utilization during data transfers, especially in high-bandwidth environments.

In terms of compatibility, the NETGEAR GA311 is designed to work seamlessly with various operating systems, including Windows and Linux. This broad compatibility ensures users can integrate this adapter with a wide range of hardware configurations without worrying about driver issues.

The GA311 embodies a robust yet compact design, making it an ideal choice for system builders or users looking for an unobtrusive upgrade for their setups. The adapter also features a standard RJ-45 connector, ensuring compatibility with the majority of networking equipment, including routers, switches, and modems.

Additionally, NETGEAR is known for its customer support and warranty policies. The GA311 typically comes with a limited lifetime warranty, giving users peace of mind regarding the longevity and reliability of their investment.

In conclusion, the NETGEAR GA311 stands out as a dependable and efficient Gigabit Ethernet adapter, boasting impressive speeds, advanced technologies, and wide compatibility. Whether for gaming, video streaming, or heavy file transfers, the GA311 is designed to meet the demands of modern networking seamlessly.