NETGEAR manual Installing the Modem, Model XM128U modem connections

Getting Started Using FirstGear for the Model XM128U ISDN Digital Modem

Installing the Modem

Before connecting any of the devices to your modem, make sure the power is turned off on your computer and your Model XM128U modem. Then connect the ISDN line to your modem. Refer to Figure 3-1 and then to the steps following the illustration for detailed instructions for making those connections.

1

6

2

6

45

3

7860PEA

Key:

1 = Model XM128U modem

2 = AC power adapter

3 = Computer (PC, Macintosh, or UNIX workstation)

4= Shielded RS-232 25-pin straight cable

5= ISDN connection to wall outlet

6= Analog device (telephone, fax, or modem)

Figure 3-1. Model XM128U modem connections

To install your Model XM128U modem:

1.Connect the male end of the 25-pin straight cable to the RS-232 COM port of the Model XM128U modem.

3-2 Installation