Getting Started Using FirstGear for the Model XM128U ISDN Digital Modem
8.Select the desired modem driver.
In most cases, depending on whether your ISP supports 64K or 128K connection, you will want to select one of the following:
Netgear XM128, PPP 64K or
Netgear XM128,
9.Click on OK.
10.Click on OK again.
The installation of your XM128 modem driver is complete. You can now use programs such as
Installing and Launching FirstGear
If you are not setting up your Model XM128U modem with a computer running Windows 95, you must have a terminal program that allows you to send and receive AT commands and responses from the modem. For further information about manual configuration, refer to Chapter 4, “Configuration,” in Reference Guide for the Model XM128 ISDN Digital Modem.
To configure your Model XM128U modem with a computer running Windows 95, you must install the NETGEAR FirstGear software that is included on a disk in your package contents.
Installation |