NETGEAR Next 300 Mbps Wireless USB 2.0 Adapter WN121T User Manual
Note: Windows XP users must have SP2 installed or the KB822603 Hot fix for SP1, 
which fixes the USB 2.0 Host controller driver. Go to the following link to install
the Hot fix: http://www.microsoft.com
Observe Wireless Location and Range Guidelines
Computers can connect over wireless networks indoors at a range which vary significantly based on the location of the computer with the Wireless USB 2.0 Adapter. For best results, avoid potential sources of interference, such as:
•Large metal surfaces
•Microwave ovens
•2.4 GHz Cordless phones
In general, wireless devices can communicate through walls. However, if the walls are constructed with concrete, or have metal, or metal mesh, the effective range will decrease if such materials are between the devices.
What Is in the Box
The product package should contain the following items:
•NETGEAR Next 300 Mbps Wireless USB 2.0 Adapter WN121T
•Installation Guide
•NETGEAR CD, including:
–Driver and Configuration Utility Software
–NETGEAR Next 300 Mbps Wireless USB 2.0 Adapter WN121T User Manual (this document)
•Warranty and Support information card
If any of the parts are incorrect, missing, or damaged, contact your NETGEAR dealer. Keep the carton, including the original packing materials, in case you need to return the product.
Default Wireless Settings
If this is a new wireless network installation, use the factory default settings to set up the network and verify wireless connectivity. If this is an addition to an existing wireless network, you need the wireless network and wireless security settings that are already defined.