NETGEAR WN121T user manual Setting up WPA-PSK Security

NETGEAR Next 300 Mbps Wireless USB 2.0 Adapter WN121T User Manual

Setting up WPA-PSK Security

Follow the steps below to configure WPA-PSK Security.

1.Run the Wireless USB 2.0 Adapter Smart Wizard.

a.Make sure the software is installed and the Wireless USB 2.0 Adapter is fully inserted in a USB port in your computer.

b.Use the icon to open the Smart Wizard. The Settings tab page opens.

Figure 2-11

2.Configure the Security settings.

a.In the Profile box, select the profile or type in a profile name.

b.In the Network Name (SSID) field select the network, or enter the SSID.

Note: You will not get a wireless network connection unless the network SSID matches exactly what is configured in the access point.

c.In the Security section, select WPA-PSK [TKIP].

For more information on WPA security, see the Web link to “Wireless Communications” in Appendix B.

3.Save your settings in a Profile.

a.Click Save Profile. All the configuration settings are saved in this profile.

b.Click Apply.

2-15

v2.0, February 2007