NETGEAR WG121 Locate your Network Neighborhood icon, Choose Settings, and then Control Panel

Page 65

User Manual for the NETGEAR 54 Mbps Wireless USB 2.0 Adapter WG121

a.Click the Add button.

b.Select Client, and then click Add.

c.Select Microsoft.

d.Select File and Print Sharing for Microsoft Networks, and then click OK.

3.Restart your PC for the changes to take effect.

Enabling DHCP to Automatically Configure TCP/IP Settings in Windows 98 and Me

After the TCP/IP protocol components are installed, each PC must be assigned specific information about itself and resources that are available on its network. The simplest way to configure this information is to allow the PC to obtain the information from a DHCP server in the network.

You will find there are many similarities in the procedures for different Windows systems when using DHCP to configure TCP/IP.

The following steps will walk you through the configuration process for each of these versions of Windows.

Locate your Network Neighborhood icon.

•If the Network Neighborhood icon is on the Windows desktop, position your mouse pointer over it and right-click your mouse button.

•If the icon is not on the desktop,

•Click Start on the task bar located at the bottom left of the window.

•Choose Settings, and then Control Panel.

•Locate the Network Neighborhood icon and click on it. This will open the Network panel as shown below.

Preparing Your PCs for Network Access

C-3

Image 65

Contents NETGEAR, Inc Technical Support FCC Information to User Export Restrictions Requirements For Operation in the European Community Page Vii Viii Contents Appendix C Preparing Your PCs for Network Access Glossary Index Xii Contents Audience, Scope, Conventions Chapter About This ManualHtml version of this manual How to Use this ManualHow to Print this Manual About This Manual Chapter Introduction About the Netgear 54 Mbps Wireless USB 2.0 Adapter WG121Key Features and Related Netgear Products What’s in the Box? Road Map for ‘How to Get There From Here’ Road Map for How to Get There From Here Netgear 54 Mbps Exchange files Use printers Introduction Verifying System Requirements Chapter Basic SetupWhat You Need Before You Begin Observing Location and Range Guidelines Two Basic Operating ModesWG121 Default Wireless Configuration Settings Install the WG121 driver and configuration utility software Basic Installation InstructionsFor Windows XP Users Installing a WG121 Install the Netgear 54 Mbps Wireless USB 2.0 Adapter WG121 Configure your WG121 LED Descriptions Verify wireless connectivity to your networkClick Install Driver & Utility For Windows 2000 & 98/Me Users Installing a WG121Found New Hardware Wizard WG121 System Tray Icon Profile Configure your WG121 and saveVerify wireless connectivity to your network Interpreting the LED on the WG121 WG121 Wireless Connection IndicatorsColor Condition Description Interpreting System Tray Icon ColorsBasic Tips TroubleshootingClick Windows XP Hotfix SP2 Q815485, and then click Remove Troubleshooting Frequently Asked QuestionsBasic Setup Basic Setup Basic Setup Using Configuration Profiles Chapter ConfigurationUnderstanding the Configuration Options How to Configure an Infrastructure Mode Profile Connecting to an Access Point in Infrastructure ModeRun the WG121 Configuration Utility Configure the wireless Network settingsHow to Configure an Ad-hoc Mode Profile Connecting to Another PC in Ad-hoc ModeWindows Run program dialog box Configure the PC network settingsPing test results How to Start a Computer-to-Computer Ad-Hoc Network Enabling Wireless Security FeaturesConfigure the Security settings How to Configure WEP Encryption SecuritySave your settings in a Profile Statistics Advanced SettingsConfiguration FCC, CE Appendix a Technical SpecificationsTechnical Specifications Infrastructure Mode Appendix B Wireless Networking BasicsWireless Networking Overview Network Name Extended Service Set Identification Essid Authentication and WEPAd Hoc Mode Peer-to-Peer Workgroup Open System Authentication AuthenticationAuthentication Open System Steps Do Not Use WEP Authentication Shared Key StepsKey Size WEP Configuration OptionsWireless Channels Radio frequency channels used are listed in Table Configuring Windows 98 and Me for TCP/IP Networking Appendix C Preparing Your PCs for Network AccessInstall or Verify Windows Networking Components Preparing Your Computers for TCP/IP NetworkingPreparing Your PCs for Network Access Locate your Network Neighborhood icon Choose Settings, and then Control PanelPrimary Network Logon is set to Windows logon Verifying TCP/IP Properties Selecting Windows’ Internet Access MethodConfiguring Windows 2000 or XP for TCP/IP Networking Dhcp Configuration of TCP/IP in Windows XP Dhcp Configuration of TCP/IP in Windows XP orTCP/IP details are presented on Support tab Right click on Local Area Connection and select Properties Dhcp Configuration of TCP/IP in WindowsVerify that Obtain an IP address Obtain an IP address automatically is selected Verifying TCP/IP Properties for Windows XP or Preparing Your PCs for Network Access Glossary DSL Internet service provider Ssid Wins Glossary Numerics Index