Start Here
Instructions in this guide are for users of Windows® who are installing the Model FA510 Network Card. For instructions on installing and verifying the Windows network driver, refer to “Install the Windows Network Driver” on the other side of this guide.
These four easy steps provide information for installing your Model FA510 Network Card:
1.Verify Package Contents
2.Install the Network Card
3.Connect the Network Cables
4.Install the Network Driver
As a last step, be sure to fill out and send in your warranty card.
To register online, direct your Web browser to the Web page at:
http://www.gearguy.com/pub/registration
Verify Package Contents
Unpack the contents of the package and make sure that you have everything.
Model FA510
Network Card
Category 5 10/100 Mbps
UTP cable (provided with
Model FA510C Network
Card)
Drivers and
Diagnostics Disk
Installation guide, Warranty & Owner Registration Card,
and Support Information Card
9034FA
Verify PC Requirements
The instructions given in this guide are for using the NETGEAR™ Model FA510 Network Card in a PC that has a Microsoft® Windows operating system.
Model FA510 Network Card Installation Guide