NETGEAR m6100 manual Select System Configuration User Accounts

Page 17

M6100 Series Switches

4.Enter the user name and password.

The default admin user name is admin and the default admin password is blank, that is, do not enter a password.

5.Click the Login button.

The web management interface menu displays.

6.Select System > Configuration > User Accounts.

7.From the User menu, select Create. A new user is created.

8.In the User Name field, enter a new user name.

9.In the Password field, enter a new password and then retype it in the Confirm Password field.

Note: If SNMPv3 authentication is used for this user, the password must be eight or more alphanumeric characters.

10.If you do not need authentication and encryption, go to Step 14.

11.To enable authentication, from the Authentication Protocol menu, select either MD5 or SHA.

12.If you do not need encryption, go to Step 14.

13.To enable encryption, from the Encryption Protocol menu, select DES. In the Encryption Key field, enter an encryption code of eight or more alphanumeric characters.

14.Click the Apply button. Your settings are saved.

Get Started

17

Page 16 Page 18
Image 17
Page 16 Page 18
Contents M6100 Series Switches Compliance SupportTrademarks Revision HistoryContents Get Started Available Publications Overview of the Access and Initial Configuration Options To configure the terminal emulation software Access the Switch Through the Console Port To access the switch through the console port Prepare a Terminal To start the switch Start the Switch and Observe the Power-On Self-TestGet Started Serviceport parms ipaddress subnetmask gateway Use ezconfig for Initial ConfigurationStart ezconfig and Configure the Switch Your changes are saved in flash memory permanent storage Overview of the Web Management Interface Use the Web Management Interface for Initial ConfigurationGet Started Get Started  To access the web management interface  To configure an Snmp V3 new user profile Select System Configuration User Accounts Use the Auto Install Configuration Tftp IP Address and Configuration File Name Concepts Auto Install Configuration ConceptsSwitch IP Address Assignment Concepts About Obtaining a Configuration File About Conflicting Tftp Server ConfigurationsHost-Specific Configuration File About DNS Server RequirementsConfiguration files and order Default Network Configuration FileEnterprise number 4 octets x0000 0x11ae Configure Auto InstallData Length 1 octet SubOption code 2 octets SubOption length 1 octet To use the CLI to configure Auto Install Configure Auto Install Through the CLIMonitor and Complete the Auto Install Process Configure Auto Install Through the Web Management InterfaceAbout Saving the Configuration Event Logging for the Auto Install Process Click the Register My Product button  To set up an account and register your productRegister the Switch

m6100 specifications

The NETGEAR M6100 series is a robust line of managed Ethernet switches designed to meet the demands of modern networking environments. Tailored for both small and medium-sized businesses as well as enterprise applications, these switches offer a variety of features and technologies that enhance network performance, security, and scalability.

One of the standout features of the M6100 series is its Layer 3 static routing capabilities. This allows for effective traffic management and efficient data flow between different subnets, facilitating better network performance. With support for IPv4 and IPv6 protocols, the M6100 ensures future-proofing as networks transition to newer protocols.

The M6100 series also includes Power over Ethernet (PoE) functionality, making it easy to power devices such as IP cameras, phones, and wireless access points directly over the Ethernet cable. This eliminates the need for additional power sources, simplifying installation and reducing clutter.

In terms of performance, the M6100 switches are built with high-capacity backplane architecture that delivers maximum throughput without bottlenecking. With support for features like link aggregation, organizations can increase bandwidth and achieve network resilience by combining multiple connections for redundancy and load balancing.

Furthermore, the M6100 series incorporates advanced security measures. Features like MAC address filtering, VLAN support, and access control lists (ACLs) help manage who can access network resources and enhance overall network security. Additionally, the switches support storm control and rate limiting to prevent potential network disruptions from excessive traffic.

Management is simplified with the intuitive web interface provided, enabling administrators to easily configure and monitor the network. For more advanced users, the switches also support SNMP (Simple Network Management Protocol), allowing for centralized management and monitoring.

The build quality of the M6100 series is impressive, with a rugged metal chassis designed to withstand the rigors of everyday use in diverse environments. Fans work unobtrusively to maintain optimal temperature levels, ensuring reliability and longevity.

In summary, the NETGEAR M6100 series delivers an impressive balance of features, performance, and security. Its combination of Layer 3 capability, PoE support, advanced security measures, and ease of management positions it as an excellent choice for organizations looking to enhance their network infrastructure. Whether for educational settings, small businesses, or larger enterprises, the M6100 series stands out as a versatile solution for a variety of networking needs.
Top Page Image Contents