NETGEAR m6100 manual Get Started

Page 8

M6100 Series Switches

•ezconfig. Use the ezconfig application through the network interface, service port, or console port (see Use ezconfig for Initial Configuration on page 9).

Perform Initial Configuration of the Switch Through a BootP or DHCP Server

You can assign IP information initially through a BootP or DHCP server over the network interface or over the service port. The network must provide either a BootP or DHCP server. By default, the DHCP protocol mode is enabled on the switch.

Configure the BootP or DHCP server with IP address and MAC information for the switch. Obtain this information through the serial port connection using the show network or show serviceport command. Set up the server with the following values:

•IP address. The unique IP address for the switch. Each IP parameter is made up of four decimal numbers, ranging from 0 to 255. If no DHCP server is available to assign an IP address to the switch through DHCP, the default IP address for the service port is 0.0.0.0 and the default IP address for the network interface is 169.254.100.100.

•Subnet mask. The subnet mask for the LAN, for example, 255.255.255.0.

•Gateway IP address. The IP address of the default router, if the switch is a node outside the IP range of the LAN.

•MAC address. The MAC address of the switch.

When you connect the switch to the network for the first time after configuring the BootP or DHCP server, the switch is configured with the IP address, subnet, and other information you supplied. The switch is ready for access over the network interface or service port.

If your network does not use a BootP or DHCP server, access the switch through the console port to configure the network information (see Perform Initial Configuration of Switch Through the Console Port on page 8) or use ezconfig (see Use ezconfig for Initial Configuration on page 9).

Perform Initial Configuration of Switch Through the Console Port

If your network does not use a BootP or DHCP server (see Perform Initial Configuration of the Switch Through a BootP or DHCP Server on page 8), you can configure the IP address of the switch through the console port.

To configure the IP address of the switch through the console port:

1.Set up a VT100-compatible terminal on the computer and open the appropriate COM port.

When the terminal interface initializes, the user login prompt displays.

2.Enter your user name and password.

Get Started

8

Page 7 Page 9
Image 8
Page 7 Page 9
Contents M6100 Series Switches Support ComplianceTrademarks Revision HistoryContents Get Started Overview of the Access and Initial Configuration Options Available PublicationsAccess the Switch Through the Console Port  To configure the terminal emulation software To access the switch through the console port Prepare a TerminalStart the Switch and Observe the Power-On Self-Test  To start the switchGet Started Use ezconfig for Initial Configuration Serviceport parms ipaddress subnetmask gatewayStart ezconfig and Configure the Switch Your changes are saved in flash memory permanent storage Use the Web Management Interface for Initial Configuration Overview of the Web Management InterfaceGet Started Get Started  To access the web management interface  To configure an Snmp V3 new user profile Select System Configuration User Accounts Use the Auto Install Configuration Tftp IP Address and Configuration File Name Concepts Auto Install Configuration ConceptsSwitch IP Address Assignment Concepts About Conflicting Tftp Server Configurations About Obtaining a Configuration FileHost-Specific Configuration File About DNS Server RequirementsDefault Network Configuration File Configuration files and orderConfigure Auto Install Enterprise number 4 octets x0000 0x11aeData Length 1 octet SubOption code 2 octets SubOption length 1 octetConfigure Auto Install Through the CLI  To use the CLI to configure Auto InstallConfigure Auto Install Through the Web Management Interface Monitor and Complete the Auto Install ProcessAbout Saving the Configuration Event Logging for the Auto Install Process  To set up an account and register your product Click the Register My Product buttonRegister the Switch

m6100 specifications

The NETGEAR M6100 series is a robust line of managed Ethernet switches designed to meet the demands of modern networking environments. Tailored for both small and medium-sized businesses as well as enterprise applications, these switches offer a variety of features and technologies that enhance network performance, security, and scalability.

One of the standout features of the M6100 series is its Layer 3 static routing capabilities. This allows for effective traffic management and efficient data flow between different subnets, facilitating better network performance. With support for IPv4 and IPv6 protocols, the M6100 ensures future-proofing as networks transition to newer protocols.

The M6100 series also includes Power over Ethernet (PoE) functionality, making it easy to power devices such as IP cameras, phones, and wireless access points directly over the Ethernet cable. This eliminates the need for additional power sources, simplifying installation and reducing clutter.

In terms of performance, the M6100 switches are built with high-capacity backplane architecture that delivers maximum throughput without bottlenecking. With support for features like link aggregation, organizations can increase bandwidth and achieve network resilience by combining multiple connections for redundancy and load balancing.

Furthermore, the M6100 series incorporates advanced security measures. Features like MAC address filtering, VLAN support, and access control lists (ACLs) help manage who can access network resources and enhance overall network security. Additionally, the switches support storm control and rate limiting to prevent potential network disruptions from excessive traffic.

Management is simplified with the intuitive web interface provided, enabling administrators to easily configure and monitor the network. For more advanced users, the switches also support SNMP (Simple Network Management Protocol), allowing for centralized management and monitoring.

The build quality of the M6100 series is impressive, with a rugged metal chassis designed to withstand the rigors of everyday use in diverse environments. Fans work unobtrusively to maintain optimal temperature levels, ensuring reliability and longevity.

In summary, the NETGEAR M6100 series delivers an impressive balance of features, performance, and security. Its combination of Layer 3 capability, PoE support, advanced security measures, and ease of management positions it as an excellent choice for organizations looking to enhance their network infrastructure. Whether for educational settings, small businesses, or larger enterprises, the M6100 series stands out as a versatile solution for a variety of networking needs.
Top Page Image Contents