Pioneer KEH-P5950 operation manual Source Level Adjustment SLA, 100 += 160 += 250 Hz

Audio Adjustment

1.Press the AUDIO button and select the F.I.E. mode (FIE) in the Audio Menu.

2.Switch the F.I.E. function

ON/OFF with the 5/∞ but- tons.

“ ”

3. Select the desired frequency with the 2/3 buttons.

100 += 160 += 250 (Hz)

Note:

•After switching the F.I.E. function ON, select the Fader/Balance mode in the Audio Menu, and adjust front and rear speaker volume levels until they are balanced.

•Switch the F.I.E. function OFF when using a 2-speaker system.

Source Level Adjustment (SLA)

The SLA (Source Level Adjustment) function prevents radical leaps in volume level when switching between sources. Settings are based on the FM volume level, which remains unchanged.

1.Compare the FM volume with the volume of the other source. (e.g. Cassette player.)

2.Press the AUDIO button and select the SLA mode (SLA) in the Audio Menu.

3.Increase or decrease the level

with the 5/∞ buttons.

The display shows “+4” – “–4”.

Note:

•Since the FM volume is the control, SLA is not possible in the FM modes.

•The CD player (one disc only) and Multi-CD player are set to the same level adjustment setting automatically.

•The AM volume level, which is different from the FM base setting volume level, can also be adjusted similar to sources other than tuner.

31