Section
19Digital Signal Processor
1Touch POSITION on the DSP function menu.
2Touch c/d/a/b to select a listening po- sition.
Touch one of these, c/d/a/b, to select a lis- tening position as listed in the table.
Key | Display | Position |
|
|
|
c | Front seat left | |
|
|
|
d | Front seat right | |
|
|
|
a | FRONT | Front seats |
|
|
|
b | ALL | All seats |
|
|
|
#To cancel the selected listening position, touch the same key again.
Note
When you make adjustments to the listening po- sition, the speaker outputs are automatically set for appropriate levels. You can tailor the levels more precisely referring to Adjusting the speaker output levels using a test tone or Adjusting the speaker output levels.
Using balance adjustment
You can change the fader/balance setting so that it can provide the ideal listening environ- ment in all occupied seats.
1Touch FADER/BALANCE on the DSP function menu.
2Touch a or b to adjust front/rear speaker balance.
Each time you touch aor b it moves the front/rear speaker balance towards the front or the rear.
FRONT:25 to REAR:25 is displayed as the front/rear speaker balance moves from front to rear.
#FR:00 is the proper setting when only two speakers are used.
3Touch c or d to adjust left/right speak- er balance.
Each time you touch cor d it moves the left/ right speaker balance towards the left or the right.
LEFT:25 to RIGHT:25 is displayed as the left/
right speaker balance moves from left to right.
Adjusting source levels
SLA (source level adjustment) lets you adjust the volume level of each source to prevent ra- dical changes in volume when switching be- tween sources.
!Settings are based on the FM volume level, which remains unchanged.
1Compare the FM volume level with the level of the source you wish to adjust.
2Touch SLA on the DSP function menu.
3Touch a or b to adjust the source vo- lume.
Each time you touch aor b it increases or de- creases the source volume.
+4 to
Notes
!The AM volume level can also be adjusted with source level adjustments.
!Video CD, CD and compressed audio are set to the same source level adjustment volume automatically.
86 En