Appendix
Additional Information
Error messages
When you contact your dealer or your nearest Pioneer Service Center, be sure to have the error message recorded.
Message | Cause | Action (See) |
|
|
|
Dirty disc | Clean disc. | |
|
|
|
| Scratched disc | Replace disc. |
|
|
|
| The disc is loaded upside down | Check that the disc is loaded correctly. |
|
|
|
Electrical or mechanical | Press RESET. | |
|
|
|
Electrical or mechanical | Consult your dealer or your nearest author- | |
|
| ized Pioneer Service Station. |
|
|
|
DIFFERENT REGION DISC | The disc does not have the same re- | Replace the DVD video with one bearing the |
| gion number as this unit | correct region number. |
|
|
|
NON PLAYABLE DISC (NON- | This type of disc cannot be played | Replace the disc with one this unit can play. |
PLAY) | by this unit |
|
|
|
|
TEMPERATURE PROTECTION | The temperature of this unit is out- | Wait until the unit’s temperature returns to |
IN MOTION | side the normal operating range | within normal operating limits. |
|
|
|
PROTECT | All the files on the inserted disc are | Replace disc. |
| secured by digital rights manage- |
|
| ment (DRM) |
|
|
|
|
TRACK SKIPPED | The inserted disc contains WMA | Replace disc. |
| files that are protected by digital |
|
| rights management (DRM) |
|
|
|
|
Understanding auto TA and EQ error messages
When correct measurement of car interior acoustic characteristics is not possible using the auto TA and EQ, an error message may appear on the display. If an error message appears, refer to the table below to see what the problem is and the suggested method of correcting the problem. After checking, try again.
Message | Cause | Action |
|
|
|
Error check MIC | Microphone is not connected. | Plug the supplied microphone securely into |
|
| the jack. |
|
| |
Error check front SP, Error | The microphone cannot pick up the ! Confirm that the speakers are connected | |
check FL SP, Error check FR SP, | measuring tone of a speaker. | correctly. |
Error check center SP, Error |
| ! Correct the input level setting of the power |
check RL SP, Error check RR SP, |
| amp connected to the speakers. |
Error check subwoofer |
| ! Set the microphone correctly. |
|
|
|
Additional Information
En 115