Section
17 Bluetooth Telephone
2 Touch to search for available cellular phones.
While searching, Search flashes. When avail- able cellular phones featuring Bluetooth wire- less technology are found, device name or Name Not Found (if names cannot be ob- tained) is displayed.
#If this unit fails to find any available cellular phones, Not Found is displayed.
3Touch the device name you want to connect.
While connecting, Connect flashes. To com- plete the connection, check the device name (Pioneer BT unit) and enter the link code on your cellular phone. If the connection is estab- lished, Connected is displayed.
# PIN code is set to 0000 as the default. You can change this code in the initial setting. Refer to Entering PIN code for Bluetooth wireless con- nection on page 105.
Using a cellular phone to initiate a connection
1Touch PHONE CONNECT on the function menu.
2Touch CONNECT OPEN.
The unit is now on standby for connection from cellular phone.
3Use cellular phone to connect to this unit.
# To cancel this function, touch CONNECT OPEN again.
# PIN code is set to 0000 as the default. You can change this code in the initial setting. Refer
to Entering PIN code for Bluetooth wireless con- nection on page 105.
Disconnecting a cellular phone
1Touch PHONE CONNECT on the function menu.
2Touch DISCONNECT to disconnect the currently connected cellular phone from this unit.
After disconnection is completed, No Connection is displayed.
Registering a connected cellular phone
1Touch PHONE REGISTER on the function menu.
Registration assignments appear on the dis- play. From the top to the third assignment are for User phone 1, 2 and 3. The rest two assign- ments are for Guest phone 1 and 2.
2Touch and hold one of the registration assignments to register the currenctly con- nected phone.
If the registration is succeeded, the device name of the connected phone is displayed in the selected assignment.
# If the assignment is empty, No Data is dis- played. If the assignment is already taken, the de- vice name appears. To replace an assignment with a new phone, first delete the current assign- ment. For more detailed instructions, see Deleting a registered phone on this page.
# If the registration failed, device name of the connected phone is not displayed in the selected
assignment. In this case, return to step 1 and try again.
Deleting a registered phone
1Touch PHONE REGISTER on the function menu.
74 En