Section
12
XM tuner (GEX-P920XM) 
Notes
!If you do not use the touch panel keys for 30 seconds, they will be hidden automatically.
!You can go to the next group of touch panel keys by touching d.
Switching the XM channel select mode
You have two methods for selecting a channel: ALL CH mode and CATEGORY mode.
When selecting ALL CH mode, channels in any category can be selected. Select CATEGORY mode to narrow your search down to only channels in a particular category.
%Touch MODE to select the desired chan- nel select mode.
Touch MODE repeatedly to switch between the two modes.
ALL CH (all channel select mode)— CATEGORY (channel category select setting)
Switching between the detail information display and preset list display
You can switch the left side of the basic screen according to your preference.
%Touch LIST.
Touch LIST repeatedly to switch between the followings:
Detail information
Storing and recalling broadcast stations
If you touch any of the preset tuning keys P1 to P6 you can easily store up to six broadcast stations for later recall with the touch of a key.
1Select the channel that you want to store in memory.
2Touch LIST to display the preset list.
#When the touch panel keys are not displayed, you can display them by touching the screen.
3Touch and hold a preset tuning key P1 to P6 until the XM preset number stops flashing.
The number you have touched will flash in the XM preset number indicator and then remain lit. The selected station has been stored in memory.
The next time you touch the same preset tun- ing key P1 to P6 the station is recalled from memory.
Notes
!Up to 18 stations, six for each of three XM bands can be stored in memory.
!You can also use aand bto recall stations
assigned to preset tuning keys P1 to P6 when the ALL CH mode is selected.
Selecting a channel
Selecting a channel in the channel category
1Touch MODE to select the channel cate- gory select mode.
CATEGORY appears on the information bar.
54
En
