Pioneer AVH-P6000DVD operation manual Setup, Setting the clock, Selecting video on rear display

Section

20 Setup

1Touch B.CAMERA on the setup menu.

2Touch c on the BACK UP CAMERA set- ting to turn rear view camera setting on.

# To turn rear view camera setting off, touch d.

3Touch c or d on the POLARITY setting to select an appropriate setting for polar- ity.

Each time you touch cor d it switches be- tween the following polarity:

!BATTERY – When the polarity of the con- nected lead is positive while the gear shift is in REVERSE (R) position

!GND – When the polarity of the connected

lead is negative while the gear shift is in REVERSE (R) position

Setting the clock

Use these instructions to set the clock.

1Touch CLOCK ADJ on the setup menu.

2Touch OFF to turn the clock display on. ON will appear in the display instead of OFF. Clock display is now on.

# To turn the clock display off, touch ON.

3Touch c or d to select the segment of the clock display you wish to set.

Each time you touch cor d it will select one segment of the clock display:

Hour—Minute

As you select segments of the clock display the segment selected will be highlighted.

4Touch a or b to put a clock right. Each time you touch ait increases the se- lected hour or minute. Each time you touch b it decreases the selected hour or minute.

Notes

!You can match the clock to a time signal by touching JUST.

—If 00 to 29, the minutes are rounded down. (e.g., 10:18 becomes 10:00.)

—If 30 to 59, the minutes are rounded up. (e.g., 10:36 becomes 11:00.)

!Even when the sources are off, the clock dis- play appears on the display.

Selecting video on rear display

You can set the rear display to automatically switch to the AVG-VDP1 image with the front display. Alternatively, you can set it to remain showing the selected video source and not change with the front display.

!You can operate this function only when a Pioneer Vehicle Dynamics Processor (AVG- VDP1) is connected to this unit.

!When selecting SOURCE and the selected source is an audio source, nothing is dis- played on the rear display.

%Touch REAR DISP on the setup menu to display video of the selected source on the rear display.

Touch REAR DISP until the desired video set- ting appears in the display.

!SOURCE – Display the video of the selected source on the rear display

!NAVI – Display the AVG-VDP1 on the rear display

98 En