Pioneer AVH-P6000DVD Adjusting 3-bandparametric equalizer, Digital Signal Processor, Band

Digital Signal Processor

Adjusting 3-band parametric equalizer

For Custom1 and Custom2 equalizer curves, you can adjust the front, rear and center equalizer curves separately by selecting a cen- ter frequency, an equalizer level and a Q factor for each band.

!A separate Custom1 curve can be created for each source.

!A Custom2 curve can be created common to all sources.

!The center speaker largely determines the sound image and getting the balance right isn’t easy. We recommend reproducing a 2- ch. audio (a CD for example) and getting the balance right among the speakers ex- cept for the center, and then reproducing a 5.1-ch. audio (Dolby Digital or DTS) and ad- justing the center speaker output to the balance you have already got among the other speakers.

%Touch PARAMETRIC EQ on the DSP function menu.

Note

You can select a center frequency for each band. You can change the center frequency in 1/3-oc- tave steps, but you cannot select frequencies that have intervals shorter than 1 octave among the center frequencies of the three bands.

Speaker select

1 Touch c or d to select SP-SEL.

Each time you touch cor d selects the item in the following order:

SP-SEL (speakers)—BAND (bands)— FREQUENCY (center frequency)—LEVEL (equalizer level)—Q. FACTOR (Q factor)

Section

19

2Touch c or d to select the speaker to be adjusted.

Touch c or d until the desired speaker ap- pears in the display.

REAR (rear speakers)—CENTER (center speak- er)—FRONT (front speakers)

# You cannot select speakers whose size is set at OFF. (Refer to Setting the speaker setting on page 88.)

Band	Digital
1 Touch c or d to select BAND.
Each time you touch cor d selects the item
in the following order:	Signal
SP-SEL (speakers)—BAND (bands)—
FREQUENCY (center frequency)—LEVEL
(equalizer level)—Q. FACTOR (Q factor)	Processor
Each time you touch cor d selects equalizer
2 Touch c or d to select the equalizer
band to be adjusted.
bands in the following order:
LOW (low)—MID (mid)—HIGH (high)

Frequency

1Touch c or d to select FREQUENCY. Each time you touch cor d selects the item in the following order:

SP-SEL (speakers)—BAND (bands)— FREQUENCY (center frequency)—LEVEL (equalizer level)—Q. FACTOR (Q factor)

2Touch c or d to select the center fre- quency of selected band.

Touch c or d until the desired frequency ap- pears in the display. 40Hz—50Hz—63Hz—80Hz—100Hz—125Hz

—160Hz—200Hz—250Hz—315Hz—400Hz— 500Hz—630Hz—800Hz—1kHz—1.25kHz— 1.6kHz—2kHz—2.5kHz—3.15kHz—4kHz— 5kHz—6.3kHz—8kHz—10kHz—12.5kHz

En 93