5.As you are looking straight into the Card Hopper, locate the two single screws which reside in the upper corners of the back plate of the Card Hopper. You will find one screw to the right of the right Card Input Guide and one screw to the left of the left Card Input Guide. Loosen these screws.
Metal Roller | Card Input Guides | |
Card Input Tray | ||
|
Card Feed
Roller
Card Input
Hopper Door
Back Plate Screws
6.As you are looking inside the printer from the front, locate the two single screws located just to the left of each end of the first Card Feed Roller. Rotate these screws to adjust the Card Separator Flap.
Card Flap | Card |
Adjustment | Feed |
Screws | Roller |
Cleaning Roller Assembly
60
Section 8: Mechanical Adjustments
