SmartShield
See Overlay.
Split Ribbon Print
Select this option to automatically print
Use 32-bit Spooler
Select this option for consistently faster print processing. This option is only selectable if operating under Windows 95 or Windows 98 and if the included
Write Direct to Port
Selecting this option provides the fastest print processing when printing exclusively from Windows 3.1x. When selected, this option allows the printer driver to bypass the Windows 3.1x Print Manager and to send all print data directly to the printer. This option devotes all of your system resources to the current print job, thereby increasing overall print speed. When the print job is finished, your system resources will again be released and devoted to the normal function of your on- screen applications.
Depending upon the processing speed and brand of your computer, you may or may not need to select this option when printing. For most computers, selecting this option will enhance the speed of the rasterizing and printing process. In this case, the Write Direct to Port option should be selected. For some computers, however, this option may either not be supported by the particular brand of PC or simply may not be necessary due to the PC’s fast processing speed. In this case, the Write Direct to Port option should not be selected.
NOTE: This option will not function properly if using any type of external printer buffer. When using a printer buffer, all print jobs should be sent through the system print spooler or through the printer’s
Section 6: Using Your Card Printer
47