FARGO electronic Pro-L manual A. Supplies Required

Pro-L Card Printer User’s Manual

A. SUPPLIES REQUIRED

For the maintenance procedures outlined in this section, you will need the following items:

νIsopropyl alcohol

νAcetone

νStandard clear adhesive tape or masking tape

νSoft, lint-free cloth

Or, to make these maintenance procedures more convenient, a Printer Cleaning Kit is available from your authorized reseller. This optional kit includes the following:

νPrinthead Cleaning Pens pre-moistened with 99.99% isopropyl alcohol for cleaning your printer’s printhead.

νCleaning Cards with an adhesive backing for automatically cleaning your printer’s gray card feed rollers and cleaning rollers.

νCleaning Pads pre-moistened with 99.99% isopropyl alcohol for cleaning your printer’s drive roller and general inside area.

IMPORTANT! 1. Never use a sharp tool or abrasive object of any kind to clean the printhead. You will damage the printhead!

2.Watches, rings, bracelets, and other jewelry can damage the printhead if accidentally bumped against it. For best results, remove such items before touching any internal components of printer.

3.As with any electronic device, internal components of the printer, such as the printhead, may be damaged if exposed to static electrical discharges. To avoid potential damage, always wear an appropriate personal grounding device, such as a wrist strap (with integral resistor) connected to an ESD ground. Or, at a minimum, make positive contact with the bare metal chassis of the printer with your hand prior to touching any internal electrical components.

50

Section 7: Maintenance