1.Remove a stack of 100 or fewer cards from the card packaging. Do not touch the area of the card where you intend to print. Oil or dirt from your hands can impair print quality.
2.Open the Card Hopper Door located on the
Card Input Tray
Card Input Guides 
Card Hopper Door
3.Insert the stack of cards into the printer by depressing the spring loaded Card Input Tray and placing the cards between the Card Input Guides (see Section 8 for further Card Input Guide information). Always load cards with the top or primary print side facing up. If inserting cards with a magnetic stripe, be sure that the magnetic stripe is positioned downward and that the stripe is oriented toward the rear of the printer. If inserting smart cards or cards with a pre- punched slot, be sure the smart card chip is positioned upward and that the chip or slotted end of the card is inserted first.
Card Input Tray
Section 4: Ribbons and Cards
25
