Other Functions
Adjusting the response positions of the touch panels (Touch Panel Calibration)
If you feel that the touch panel keys on the screen deviate from the actual positions that respond to your touch, adjust the response po- sitions of the touch panel. There are two ad- justment methods:
!Make sure to use the supplied pen for ad- justment, and gently touch the screen. If you press the touch panel forcefully, the touch panel may be damaged. Do not use a sharp pointed tool such as ballpoint pen or a mechanical pen. Otherwise the screen is damaged.
1Touch the source icon and then touch OFF to turn this unit off.
# When the source icon is not displayed, you can display it by touching the screen.
2Press and hold BAND.
The
3Touch each of the arrows on the four corners of the screen with the touch panel adjustment pen.
Arrows you touch turn red.
# If the arrows are not turned red, the
# To cancel the adjustment, press V.ADJ.
4Press BAND to complete the
The adjusted position data is saved.
!Do not turn off the engine while saving the adjusted position data.
Section
23
5Press BAND to proceed to the
The
# To cancel the adjustment, press V.ADJ.
6Gently touch the center of the + mark displayed on the screen with the touch panel adjustment pen.
After you touch all the marks, the adjusted po- sition data is saved.
!Do not turn off the engine while saving the adjusted position data.
7To complete the adjustment, press V.ADJ.
# To restart the
Note | Other | |
If touch panel adjustment cannot be performed | ||
properly, consult your local Pioneer dealer. | Functions | |
Displaying the | ||
| ||
(Pioneer Vehicle Dynamics |
| |
Processor) |
|
This unit can be used as the display unit for the
!You can operate this function only when a Pioneer Vehicle Dynamics Processor (AVG- VDP1) is connected to this unit.
%Press V.ADJ to switch the display to the
# To return to the video of sources, press V.ADJ again.
En 109