Pioneer AVH-P6000DVD Bluetooth Telephone, Setting up for hands-freephoning, Making a phone call

Section

17 Bluetooth Telephone

Note

Equalizer curve for the phone source is fixed. When selecting the phone source, you cannot op- erate Using the equalizer on page 81.

proper level. If the volume is muted (zero level) on your cellular phone, the volume level of your cel- lular phone remains muted even after the cellular phone is disconnected.

Setting up for hands-free phoning

Before you can use the hands-free phoning function you must set up the unit for use with your cellular phone. This entails establishing a Bluetooth wireless connection between this unit and your phone, registering your phone with this unit, and adjusting the volume level.

1 Connection

For detailed instructions on connecting your phone to this unit via Bluetooth wireless tech- nology, refer to Connecting a cellular phone on the next page.

#Your phone should now be temporarily con- nected. However, to make best use of the technol- ogy, we recommend you register the phone to this unit.

2 Registration

To register your temporarily connected phone, refer to Registering a connected cellular phone on page 74.

3 Volume adjustment

Adjust the earpiece volume on your cellular phone for comfort. When adjusted, the volume level is recorded in this unit as the default set- ting.

#Caller’s voice volume and ring volume may vary depending on the type of cellular phone.

#If the difference between the ring volume and caller’s voice volume is big, overall volume level may become unstable.

#Before disconnecting the cellular phone from this unit, make sure to adjust the volume to a

Basic operation of hands- free phoning

Important

Advanced operations that require your attention such as dialing numbers on the monitor, using phone book, etc., are prohibited while you are driving. When you need to use these advanced operations, stop your vehicle in a safe place.

Making a phone call

Voice recognition

1Touch VOICE to turn the voice recogni- tion function on.

Voice dial icon appears on the information bar. Voice recognition function is now ready.

# To cancel the voice recognition function, touch VOICE again.

2Pronounce the name of your contact.

Taking a phone call

Answering an incoming call

1When a call comes in, touch . Touching switches between callers on hold.

2To end the call, touch .

The estimated call time appears in the display (this may differ slightly from the actual call time).

72 En