Pioneer AVH-P6000DVD Audio Adjustments Using the equalizer, Recalling equalizer curves

Audio Adjustments

Using the equalizer

The equalizer lets you adjust the equalization to match the car’s interior acoustic character- istics as desired.

Recalling equalizer curves

There are six stored equalizer curves which you can easily recall at any time. Here is a list of the equalizer curves:

Display Equalizer curve

Powerful Powerful

Natural Natural

Vocal Vocal

Custom Custom

Flat Flat

Super Bass Super bass

!Custom is an adjusted equalizer curve that you create.

!A separate Custom curve can be created for each source. If you make adjustments, the equalizer curve settings are memorized in Custom.

!When Flat is selected, no supplement or correction is made to the sound. This is useful to check the effect of the equalizer curves by switching alternatively between Flat and a set equalizer curve.

%On any source, touch EQ (displayed at the left bottom corner) to select the equali- zer.

Touch EQ repeatedly to switch between the fol- lowing equalizers: Powerful—Natural—Vocal—Custom—Flat

—Super Bass

Section

18

Adjusting equalizer curves

You can adjust the currently selected equalizer curve setting as desired. Adjusted equalizer curve settings are memorized in Custom.

!You can adjust the center frequency and the Q factor (curve characteristics) of each

currently selected curve band (LOW/MID/ HIGH).

		Audio
Level (dB)
		Adjustments
	Q=2N Q=2W
Center frequency
	Frequency (Hz)
1 Touch EQ MENU on the audio function
menu.
2 Touch c or d on the BAND setting to
select the equalizer band to adjust.
Each time you touch cor d selects equalizer
bands in the following order:
LOW (low)—MID (mid)—HIGH (high)
3 Touch c or d on the LEVEL setting to
adjust the level of the equalizer band.
Each time you touch cor d increases or de-
creases the level of the equalization band.
+6 to –6 is displayed as the level is increased
or decreased.
4 Touch c or d on the FREQUENCY set-
ting to select the desired frequency.
Touch c or d until the desired frequency ap-
pears in the display.
Low: 40HZ—80HZ—100HZ—160HZ
Mid: 200HZ—500HZ—1KHZ—2KHZ
High: 3KHZ—8KHZ—10kHZ—12KHZ
5 Touch c or d on the Q.FACTOR setting
to select the desired Q factor.
Touch c or d until the desired Q factor ap-
pears in the display.
2N—1N—1W—2W

En 81