Before You Start
Mark Meaning
Section
02
2 Press RESET with a pen tip or other pointed instrument.
2
Indicates the number of audio sys- tems.
Before
2Indicates the number of subtitle lan-
guages.
Indicates the number of viewing an-
3 | gles. |
|
|
|
|
| Indicates the picture size (aspect ratio: |
| 16 : 9 |
| LB | |
|
| screen | ||
|
|
|
| |
|
|
|
| |
|
|
|
|
|
1 |
|
| Indicates the number of the region | |
|
|
|
| |
| ALL |
| where playback is possible. | |
|
|
|
|
|
When an operation is prohibited
When you are watching a DVD and attempt to perform an operation, it may not be performed because of the programming on the disc.
When this happens, the icon 
appears on the screen.
!The icon 
may not appear with certain discs. 
You Start
RESET button
Notes
!When using with
!After completing connections or when you want to erase all memorized settings or return the unit to its initial (factory) settings, switch
your engine ON or set the ignition switch to ACC ON before pressing RESET.
Resetting the microprocessor
Pressing RESET lets you reset the micropro- cessor to its initial settings.
The microprocessor must be reset under the following conditions:
!Prior to using this unit for the first time after installation
!If the unit fails to operate properly
!When strange or incorrect messages ap- pear on the display
1 Turn the ignition switch OFF.
About the demo mode
Important
The red lead (ACC) of this unit should be con- nected to a terminal coupled with ignition switch on/off operations. If this is not done, the vehicle battery may be drained.
The feature demo automatically starts when you select the source OFF. The demo con- tinues while the ignition switch is set to ACC or ON. To cancel the feature demo, press and hold ENTERTAINMENT (ENT). To restart the feature demo, press and hold ENTERTAINMENT (ENT) again. Remember that if the feature demo continues operating when the car engine is turned off, it may drain battery power. 
En 
13
