Whisper function is working, Not properly adjusted | Dukane 8943

Troubleshooting

Phenomena that may be easy to be mistaken for machine defects (continued)

	Phenomenon	Cases not involving a machine defect	Reference
	Phenomenon	Cases not involving a machine defect	page
			page

		The brightness and/or contrast are adjusted to an
		extremely low level.	24, 25,
		Adjust BRIGHTNESS and/or CONTRAST settings to a	26
		higher level using the menu function.
	Pictures appear	The WHISPER function is working.
	dark.	Select NORMAL for the WHISPER item in the SETUP	25, 36
		menu.
		The lamp is approaching the end of its product
		lifetime.	56, 57
		Replace the lamp.
		Either the focus and/or horizontal phase settings are
		not properly adjusted.	19, 30
	Pictures appear	Adjust the focus using the focus ring, and/or H PHASE	19, 30
	Pictures appear	Adjust the focus using the focus ring, and/or H PHASE
	blurry.	using the menu function.
		The lens is dirty or misty.	61
		Clean the lens referring to the section “Caring for the lens”.	61

	Pictures are	The exhaust ventilation holes at front is blocked by
	Pictures are	some objects.	4
	trembling.	some objects.	4
	trembling.	Remove any objects from front side of the projector.
		Remove any objects from front side of the projector.

NOTE • Although bright spots or dark spots may appear on the screen, this is a unique characteristic of liquid crystal displays, and it does not constitute or imply a machine defect.

67

Image 68

Dukane 8943, 8918 Whisper function is working, Lamp is approaching the end of its product Lifetime, Not properly adjusted

Contents

USER’S Manual Trademark acknowledgment About this manualThank you for purchasing this projector Content Contents of package Fastening the lens cover Part names ProjectorHOT!4 HOT Control panel Rear panelM1-D port 10 Video port 10 Remote control Back Remote controlLaser pointer 13 It is a beam outlet Enter button to push down the center point Setting up Arrangement On a horizontal surfaceSuspended from the ceiling Down Adjusting the projectors elevator Using the security bar and slotSecurity bar Anti-theft chain or wire Security slot Foot VCR/DVD player Connecting your devicesSignal source Remote control Speakers Connecting your devices About Plug-and-Play capability Connecting power supply AC inlet Connector of the power cord to the outlet Remote control Laser pointerPutting batteries Laser button About the remote control signal Changing the frequency of remote control signal Using as a wired remote control Using as a simple PC mouse & keyboard Power on/off Turning on the powerTurning off the power Power switch is turned on after the power was turned off by Adjusting the volume Selecting an input signalOperating Temporarily muting the sound Selecting an aspect ratio Searching an input signalSelecting an input signal Adjusting the zoom and focus Adjusting the lens shiftUsing the automatic adjustment feature  For a video signal or s-video signal Adjusting the position Remote control. a dialog will appear onCorrecting the keystone distortions Press the Keystone button on Using the magnify feature Press the on button of Magnify on the remote controlFreezing the screen Magnify indication will appear on the screen Temporarily blanking the screen Enter button Using the menu functionAdvanced Menu Easy Menu Easy Menu Picture Menu Gamma Using the / buttons switches the color temperature mode Picture MenuCustom and then pressing the button or Color Temp Active Iris LOAD1, LOAD2, LOAD3, LOAD4MY Memory SAVE1, SAVE2, SAVE3, SAVE4 Position Image MenuOver Scan Phase Auto AdjustImage Menu Size Input Menu Progressive3D-YCS Color Space Input Menu ComponentVideo Format M1-D Frame Lock RGB Resolution Custom Resolution BOX Setup Menu Some input, this function may not work wellFunction may not work correctly Function may not work well Setup Menu Normal ó WhisperBrightness are reduced Normal ó Hinvert ó Vinvert ó H&VINVERT Audio Menu Using the /// buttons adjusts the menu position Using the / buttons switches the mode for the blank screenScreen Menu Or keep no operation for about 10 seconds Screen Menu Start UP Capturing error has occurred. Please try again MyScreen registration is finished Message Source Name Auto on Option MenuAuto Search Lamp Time Option MenuAuto OFF Service Using the / buttons switches the rotation speedPerforms automatic keystone distortion correction 35 FAN Speed Lens Type GhostFilter Message Factory Reset KEY LockRemote Receiv Remote Freq Using Security Features Inputting the PasswordChanging the Password Security Using the MyScreen Password Function Description If you have forgotten your PasswordTurning on the MyScreen Password Setting the Password Registering the PIN Code Using the PIN Lock FunctionTurning the Password off Turning Off the PIN Lock Function If you have forgotten your PIN Code Turning On the Transition Detector Function Using the Transition Detector FunctionSetting the Transition Detector Password Setting the Transition Detector off BOX Network Menu Network Menu TimeDifference Date and Time Refer to the separate volume on Network Functions Network functions Maintenance Case of replacement by yourselfLamp Type number = Replacing the lamp Lamp Lamp Type number = MU03642 Cleaning the air filter Air filter Air filter Will come up. Remove the battery Put a new battery Internal clock batteryTake the old battery out Maintenance Troubleshooting There is no input signalInternal temperature is rising Related messages Regarding the indicator lamps Regarding the indicator lamps Electrical power cord is not plugged Power switch is not set to the on positionSignal cables are not correctly connected Signal source does not correctly work Volume is adjusted to an extremely low level Audio setting is not correctColor settings are not correctly adjusted Color Space setting is not suitable Not properly adjusted Either the focus and/or horizontal phase settings areWhisper function is working Lamp is approaching the end of its product Lifetime Warranty and after-service Specification Specifications Example of computer signal Initial set signals M1-D At RGB signalConnection to the ports Mini DIN 4pin jack Pin Connection to the ports Ø3.5 stereo mini jack MVrms 1kΩ output impedance Ø3.5 stereo mini jack MVrms 47kΩ terminatorRCA jack MVrms 47kΩ terminator RJ-45 jack Pin Signal RS-232C Communication Connecting the cableCommunications setting Requesting projector status Get command Changing the projector settings Set commandUsing the projector default settings Reset Command Increasing the projector setting value Increment command Be EF CRC Be EF EA F5 Be EF CE D6 Normal Be EF Be EF B6 CD Be EF CE FE High Be EF English Be EF C2 FF Freeze User’s Manual Network Functions Failure & Warning Alerts via E-mail Projector Management via SnmpControlling the Projector via Scheduling Still Image Transfer Before using the network functions… If using a network with Dhcp enabled Configuring and controlling the projector via a web browser Configuring and controlling the projector via a web browser Settings Https//192.168.1.10 into Displays the Dhcp configuration settings Network Information Network Settings Displays and configures network settingsDhcp on Dhcp OFF Click the Apply button to save the settings Port SettingsDisplays and configures communication port settings Mail Settings Displays and configures e-mail addressing settings Alert Settings Displays and configures failure & warning alerts Alert Settings Lamp ErrorTemp Error Air Flow Error Filter Error Lamp Time ErrorCool Error Other Error Schedule Execution ErrorLamp Time Alarm Alarm Time Filter Time Alarm Transition Detector AlarmAuthentication Failure Change the Lamp is Schedule Settings Displays and configures schedule settings Schedule Setting Parameter Date/Time SettingsDisplays and configures the date and time settings Date/Time Settings Sntp Security Settings Security Settings Network ControlSnmp Community Name Projector Control Projector Control Performs the Automatic keystone distortion correction Selects the 3D-YCS settingProjector Control Option Description AudioScreen Displays and configures the current projector status Projector StatusNetwork Restart Logoff Example If the IP address of the projector is set to Failure & Warning Alerts via E -mail10 Mail Settings Projector management via Snmp Snmp settingsConfigure the following items via a web browser to use Snmp Controlling the Projector via Scheduling Date/Time Settings 18 Date/Time setting can be adjusted via a web browser Schedule Settings 16 Schedule settings can be configured from a web browser Shot Still Image Transfer Settings Shot Still Image Transfer DisplayCommunication Port Following port is used for e-SHOT TCP #9716 Shot Still Image Transfer Settings Shot Still Image Transfer Transmission Command Control via the Network Command Control Settings 9 Command Control Settings 20 Command format Reply Error codeHeader Data RS-232Ccommand Send Data format Reply Data format Authentication Automatic Connection Break Read this Safety Guide first Typical Symbols Never use the projector if a problem should occur Use special caution for children and petsDo not insert liquids or foreign object Never disassemble and modify Be cautious of High temperatures of the projector Never look through the lens or openings when the lamp is onBe cautious of the power cord connection Be sure to connect with ground wire Be careful in handling the battery of the remote control Be careful in handling the light source lamp Avoid a high temperature environment Be careful in moving the projectorDo not put anything on top of the projector Avoid a smoky, humid or dusty place Remove the power cord for complete separation Do not give the remote control any physical impactTake care of the cabinet and the remote control Take care of the lens About displaying characteristic Turn the power on/off in right orderConnecting with notebook computer About consumables Clean the projector or replace the lamp yourself Projector vents, or get it in your eyes or mouthDamaging the lamp Bulb is not broken FCC Statement Warning For the Customers in Canada Audio Visual Products